Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Garland
A new driveway gate in Garland typically costs between $4,800 and $11,500 for a steel or ornamental iron gate with a basic opener, and most installations wrap up in one to three days once footings are cured. We measure, quote a firm price, and schedule the work without drama. Ironworks Gate Co. has spent over 42 years installing and servicing gates across the DFW metroplex, and our crews know Garland’s neighborhoods, soil, and building patterns well enough to anticipate problems before they show up on the invoice. If you’re ready to talk through your project, call (936) 277-6521 and a live person will answer, day or night.
Why Ironworks Gate Co. Is Garland’s Preferred Gate Installation Company
Garland homeowners call us because we do the work once and write the guarantee down. Victor Salinas leads a team of background-checked, uniformed technicians who handle gate work the way they’d handle it at their own mother’s house. The 90-Day Done Right Promise means exactly what it says: if something isn’t right after we leave, we come back and fix it. No forms, no phone tag, no arguing.
We hear the same thing from Garland customers after most jobs: they’ve had a handyman out before who set the posts shallow and disappeared by the next spring. That’s the expensive way to buy a gate. Our crews set posts the way Garland’s clay demands and test every operator under load before we call the job done. We also maintain strong local relationships with suppliers across the metroplex, which means shorter lead times on custom steel and hardware for Garland jobs.
Our Gate Installation Services in Garland
Every gate project starts with a site visit so we can look at the ground, the slope, the access, and how you actually use the driveway. Then we quote a written price before any work begins. Here’s what we install most often in Garland.
Driveway Gate Installation
Driveway gates in Garland range from simple single-swing steel frames to full ornamental iron with automated operators and keypad entry. Most Garland driveways sit flat enough for a swing or slide configuration, but we’ll tell you honestly which makes more sense for your lot. A double driveway gate with opener and keypad usually lands between $6,500 and $12,000 depending on width, material, and power access.
Sliding Gate Installation
Sliding gates are a common choice on Garland properties where the driveway slopes toward the house or where a swing gate would block the sidewalk or street. They also hold up well on long, narrow lots like those in older Garland neighborhoods near downtown. A single slide gate with rack and operator typically runs $5,500 to $9,800 in Garland, with taller or heavier gates pushing toward the upper end.
Swing Gate Installation
Swing gates work well on wide, flat driveways with room for the gate leaf to arc inward. The key in Garland is the hinge post: a 4×4 steel post in a shallow footing will lean within a few wet seasons. We set hinge posts deep with rebar and let the concrete cure fully before hanging any weight. Single swing gate installations with opener generally run $5,200 to $8,900.
Security Gate Installation
Security gates for Garland properties often combine a heavier steel frame, a maglock or electric strike, and an access control system like a keypad, card reader, or intercom. We’ve installed them at rental properties, small businesses, and homes where the driveway is the only real entry point. Expect $7,000 to $14,000 for a full security gate with access control, depending on the level of automation and entry hardware.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Garland
We’re certified to install and service LiftMaster, FAAC, and BFT openers, along with six other major gate-automation brands. That matters in Garland because if your operator fails three years from now, you don’t want to hear that nobody works on that brand. Our technicians carry common parts for all three brands in the truck, and our parts desk keeps deeper inventory stocked for Garland service calls, which means fewer return trips and less waiting on the driveway.
Common Gate Installation Problems We See in Garland Homes
These are the failure points we walk into repeatedly on existing gates across Garland. Each one is avoidable on a new installation if the work is done properly.
- Posts heaving out of plumb. Garland sits on Blackland Prairie clay, which swells when wet and shrinks when dry. A post set in a 24-inch hole will move within two or three seasons. We don’t set gate posts shallower than 36 inches in Garland, and we use a rebar cage in the footing so the concrete holds as one mass rather than cracking loose.
- Operators missing safety photocells or loop detectors. A gate that can’t see a car or a child is a serious hazard, and it fails UL 325 entrapment standards. We wire photocells on both sides and add loop detectors where the driveway geometry calls for them. Every operator we install gets tested for reversal pressure before we leave.
- Rack and pinion chewed up by dust and heat. Garland’s summers are hot and dusty, and that fine dust works its way into slide gate track hardware. A poorly aligned rack wears the pinion gear unevenly, then the gate binds mid-travel. We set the rack with proper clearance and use sealed bearings where possible, then test the full travel under load.
- Undersized operators on heavy gates. A gate that weighs 800 pounds needs an operator rated for it, not a bargain unit rated for 400. We size every operator by actual gate weight and cycle frequency, because an undersized motor burns out its limit switches and control board fast in Garland heat.
Pricing for Gate Installation in Garland, TX
Here’s what Garland homeowners can expect to spend on a new gate in 2026, installed and tested by a crew that stands behind the work:
- Pedestrian gate (steel frame, no operator): $1,800-$3,200
- Single driveway gate (steel or ornamental, with opener): $5,500-$8,900
- Double driveway gate (two leaves, with opener and keypad): $6,500-$12,000
- Sliding driveway gate (with rack and opener): $5,500-$9,800
- Security gate (heavy steel, maglock or strike, access control): $7,000-$14,000
What moves the price: gate width and material, power run distance from the house or panel, whether we’re tying into existing concrete or pouring new footings, and the type of access control you want. Every quote is written, and the price we quote is the price you pay. We don’t come back asking for more after the post holes are dug. Estimates are free, and there’s a 5% discount for seniors and veterans on every job. Call (936) 277-6521 to schedule a site visit.
We Also Serve Cities Near Garland
Ironworks Gate Co. handles Gate Installation in Garland and keeps crews scheduled across the surrounding area, including Richardson, Mesquite, Addison, and Dallas. If your property sits on the edge of town or you’re not sure which crew covers your street, call us and we’ll sort it out in one conversation. The scheduling desk runs from a DFW office, but the crews live and work in Garland’s service area.
Serving Garland, TX - Our Local Coverage Area
We’re based in the Garland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Garland
A gate post footing in Garland should go at least 36 inches deep and sit below the local frost line with a rebar cage for structural integrity. Blackland Prairie clay expands and contracts with moisture, and anything shallower will heave and throw the gate out of alignment within a few seasons. We pour 36-inch footings as the minimum on every gate post in Garland, and we let the concrete cure fully before hanging the gate. Call (936) 277-6521 for a site assessment and written quote.
Yes, you need both on most Garland driveway gates. The safety photocell watches for a vehicle or person in the gate path and reverses the gate on contact. The loop detector buried in the driveway tells the opener when a car is present so the gate doesn’t close on it. Together they satisfy UL 325 entrapment protection, and we wire both on every automated installation. It’s not an upsell; it’s the standard we’d install on our own homes.
A gate that sags at the hinge post tells you the post has moved in its footing, not that the gate frame has bent. In Garland’s clay, that movement happens when the footing was poured too shallow or without steel reinforcement. The fix is a new post set 36 inches deep with a rebar cage and a full cure before the gate goes back on. We see this all over Garland, from older 1960s ranch properties near downtown to newer builds in Firewheel.
A solar gate opener can work in Garland, but only if the gate has good southern exposure and you’re not running the gate more than 10 to 12 cycles a day. Garland gets plenty of sun, but shaded lots and high-use driveways drain solar batteries faster than the panel can recharge. If you have consistent grid power to the gate area, a hardwired opener is more reliable long term and costs less to maintain. We’ll tell you honestly which setup fits your driveway.
A proper swing gate installation in Garland includes deep post footings at 36 inches minimum, a steel hinge post reinforced with rebar, properly rated hinges and brackets, a concrete pad for the operator arm, safety photocells on both sides, a pinch-point guard on the hinge side, and full reversal testing. The operator matters, but the structure underneath it matters more in Garland’s soil. If the posts move, the operator can’t hold the gate true. Call (936) 277-6521 for a quote that covers the whole job, not just the motor.
Contact Ironworks Gate Co. for Gate Installation in Garland
If you’re in Garland and want a gate installed once, correctly, with a written guarantee behind it, call (936) 277-6521. A live person answers, every time. We’ll schedule a site visit, talk through your options in plain language, and hand you a written quote before any work begins. Victor Salinas and the team have been standing behind gate work for over four decades, and the 90-Day Done Right Promise means you don’t have to wonder if the gate will still work next spring. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co.