Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Richardson
A driveway gate installation in Richardson typically runs between $2,800 and $9,500, with most double swing gate projects landing in the $3,500 to $6,000 range when you include groundworks, operators, and safety equipment. The timeline runs two to four weeks from the measure to the final inspection, because the work is ordered, dug, set, wired, and tested in sequence. If you’re calling from Canyon Creek or Reservation, from a 1970s ranch near Heights Park or a newer build off Campbell Road, you’ll reach a live person at (936) 277-6521 who can schedule a free measure and give you a written price before any work begins.
We’re Ironworks Gate Co., and we’ve been building and automating driveway gates for over 42 years. We know Richardson’s soil, its inspection rules on both sides of the county line, and the difference between a gate that lasts six years and one that’s still square at twenty. You call. We show up. We quote a fixed number. Then we do the work right.
Why Ironworks Gate Co. Is Richardson’s Preferred Gate Installation Company
Richardson is a city where people stay. The homes near Cottonwood Park, along Mimosa Drive, through the Custer Road corridor, and out toward Breckinridge Park are full of homeowners who have been in place for twenty years and plan to be there another twenty. That’s who calls us. They’re not asking for the cheapest bid. They want a gate that closes properly every evening and doesn’t sag before the mortgage is up.
That’s the work we’re built for. Ironworks Gate Co. is the dedicated gate specialist for homeowners who want the job done once, correctly, and guaranteed in writing. Every completed job in Richardson carries our 90-Day Done Right Promise: if it’s not right, we come back and make it right. No paperwork, no arguing. It’s the Keystone Standard, applied to every gate we hang, from a single pedestrian gate in Duck Creek to a wide double swing gate on Waterview Parkway.
Our technicians are background-checked, uniformed, and guided by the K.E.Y.S. values code: Krafted right, Every time, Your home first, Standing behind it. The 400th job gets the same care as the first. When you call, a live person answers, 24 hours a day, seven days a week. Not a voicemail tree. Not a call center. The person who answers understands gate work.
Our Gate Installation Services in Richardson
Most Richardson gate projects fall into four categories. Here’s how we handle each one in this city specifically.
Driveway Gate
A driveway gate is the most common installation we do in Richardson, and the one where the soil matters most. Richardson’s expansive clay soil swells with rain and shrinks in drought, which means a hinge post set shallow will move. We dig footings to 36 inches on every driveway gate we install here, and we set posts in concrete that’s given time to cure before the leaf is hung. The gate itself can be steel, aluminum, or ornamental iron, built to match the home’s existing fence or trim.
Pedestrian Gate
Pedestrian gates in Richardson often live alongside the driveway gate, keyed to the same access system so you can walk through without opening the driveway. We see plenty of these on properties in the Greenwood Hills and Arapaho Heights areas, where older homes have front-yard fences and a walk gate that’s original to the house. We install new gate frames, hang quality hinges that won’t bind when the post shifts in clay, and add closers so the gate doesn’t slam in the wind.
Sliding Gate
Sliding gates are the right answer when the driveway slopes up or the setback is too tight for a swing. In Richardson, sliding gates are common on corner lots and on properties along busy streets like Renner Road, where you don’t want a swing leaf arcing out into traffic. We install rolling gates with proper end stops, guide rollers, and, on automated gates, a loop detector for the exit lane so the gate opens automatically as your car approaches.
Swing Gate
Swing gates remain the most popular choice for Richardson’s wider residential driveways, especially double swing gates on estate-style lots. The critical work here is the hinge post and the operator choice. A double swing gate needs evenly loaded leaves and operators that reverse if they meet resistance. We hang swing gates so the leaves meet dead center, with no droop at the outer edge. It’s the difference between a gate that closes like new for years and one that scrapes the driveway within two summers.
Swing Gate, Slide Gate, and Security Gate work make up most of our Richardson installation schedule. Gate Installation is all we do, all day, every day. That focus is why our crews know Richardson’s soil, codes, and inspection quirks without having to look anything up.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Richardson
We’re trained and equipped on nine gate-automation brands, including LiftMaster, FAAC, BFT, and Linear, so whatever is on your driveway, the correct fix or installation happens on the first visit. For Richardson homes with a double swing gate, we install more LiftMaster LA400 operators than anything else, because they’re built for the weight and cycle count of a daily-use residential swing. For sliding gates, FAAC and BFT make the rolling gate operators we trust most. We stock common parts locally for Richardson customers, so a sensor, a control board, or a replacement remote doesn’t sit on backorder while your gate is down.
Common Gate Installation Problems We See in Richardson Homes
When we arrive at a Richardson property, we see the same failure patterns repeating. The original installer wasn’t a gate specialist, and the shortcuts show up within a few years. Here’s what we typically find:
- Shallow hinge post footings. Richardson’s expansive clay soil moves with every wet and dry cycle. A post set 18 inches deep in this soil will lean within a few seasons, and the gate scrapes or binds. We dig to 36 inches and set it in concrete. The difference is measurable.
- No exit loop detector on sliding gates. An automated slide gate with no loop under the driveway only opens on the remote. That means you back up into the street if you’re driving home without the remote in the car. We install loop detectors as standard on any automated sliding gate in Richardson.
- No entrapment protection on the operator. A swing or slide gate wired without photo-eyes or a reversing edge fails the city inspection on the Dallas County side of Richardson, and it’s genuinely dangerous. UL 325 entrapment protection is not optional. We wire it and we test it before we leave.
- Wrong operator for the gate’s weight. We see plenty of gates hung with an opener that’s undersized for the leaf. The motor burns out early, or the gate won’t close fully on a windy day. We match the operator to the actual weight and cycle count of the gate, not to the cheapest spec sheet.
Last spring we replaced a sagging double swing gate on a property near Breckinridge Park, where the original installer had set the hinge post in a shallow footing and the whole gate leaned into the driveway. Our crew dug a true post footing to 36 inches, re-set the hinge post in concrete, then hung new LiftMaster LA400 operators with safety photocells and ran a full reversal test before we called the job done. That’s what a proper installation in Richardson includes.
Pricing for Gate Installation in Richardson, TX
A pedestrian gate in Richardson typically runs $800 to $2,200, depending on material and width. A single swing driveway gate with automation runs $2,800 to $5,500. A double swing gate, which is the most common request on estate lots off Campbell Road and near the Creek Hollow area, runs $3,500 to $6,500 complete. A sliding gate with a loop detector and operator runs $4,000 to $9,500, because the groundworks and track are more involved.
What moves the number is the width of the opening, the post condition, the operator brand, and whether the power run is already at the gate location. We give you a fixed price before any work begins, and that’s the price you pay. Quoted and agreed before a single bolt is turned. Call (936) 277-6521 for a free measure and a written estimate. We don’t ballpark over the phone; we come out and look.
- Pedestrian gate: $800 – $2,200
- Single swing driveway gate with automation: $2,800 – $5,500
- Double swing gate with automation: $3,500 – $6,500
- Sliding gate with loop detector and operator: $4,000 – $9,500
- Operator replacement on existing gate: $1,200 – $3,200
We Also Serve Cities Near Richardson
Our crews serve Richardson and the neighboring communities of Garland, Addison, Carrollton, and Dallas. If you’re just outside the city line, the same free measure and written-price process applies. For details on our approach to Gate Installation in Richardson, call the office and ask for Victor. He’ll get you on the schedule.
Serving Richardson, TX - Our Local Coverage Area
We’re based in the Richardson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Richardson
At least 36 inches deep and set in concrete, with the hole bell-bottomed at the base where the soil allows. Richardson’s expansive clay soil moves more at shallower depths, so a 36-inch footing anchors the post below the worst of the shrink-swell cycle. If the Dallas County inspector reviews your installation, they’ll expect a properly set post, not a bag of dry mix poured around a post that’s barely in the ground. Call (936) 277-6521 and we’ll dig it right the first time.
Yes, if you want the gate to open automatically as your car approaches from the inside. A loop detector in the exit lane makes the gate open on your car’s presence, not just the remote. Without it, you’ll be backing up at the street every time you forget the remote on the counter. We install loop detectors as standard on every automated sliding gate in Richardson.
LiftMaster LA400 operators are what we install most often for Richardson double swing gates. They’re built for the weight and daily cycle count of a residential swing gate, and they’re a brand we’re certified to service, so warranty and parts support are never a question. For some heavier gates, we’ll spec a FAAC or BFT instead. Your gate gets the operator that matches its actual weight, not whatever’s on the truck.
No. Entrapment protection is required by UL 325 and enforced by city inspectors on the Dallas County side of Richardson. An automatic gate without photo-eyes or an equivalent reversing edge will fail inspection, and it’s a safety liability. We wire photo-eyes and run a full reversal test on every automated gate we install in Richardson, before the inspector ever shows up.
We can, with a few honest caveats. Richardson’s sun is generally good, but a solar opener on a sliding gate needs a properly sized panel and battery bank to handle the gate’s draw, especially in winter or during a cloudy stretch. For most Richardson sliding gates we recommend a hardwired AC operator, but a solar setup is worth discussing if the power run to the gate is cost-prohibitive. We’ll tell you straight which one makes sense for your property, and you’ll get a fixed price before work starts.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Richardson, TX.