Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Access Control for Highland Park Homeowners
The Best Gate Access Control in Highland Park, TX typically costs between $450 and $2,800 depending on whether you’re adding a simple keypad, upgrading to a phone entry system, or installing a full video intercom with smart access. Most repairs and replacements are completed in a single visit by our uniformed technicians. If your keypad has stopped responding or your remote no longer opens the gate, call (936) 277-6521 and a live person will answer, day or night.
Ironworks Gate Co. has been home to Highland Park’s gate access needs for over 42 years, since 1984. Victor Salinas leads a team that works exclusively on driveway and estate gates, the full scope from hinges and welds to keypads and automation. We’re not a generalist handyman service. We’re the gate specialist that other contractors call when they’re in over their heads. Our written 90-Day Done Right Promise means the job is finished correctly, or we come back and make it right, every time.
What Our Gate Access Control Service Includes
Access control is how you decide who gets in and who doesn’t. That starts with the device at the street and ends with the motor pulling the gate open. We handle both sides of that equation, so the system works as one unit instead of a collection of parts that don’t talk to each other.
Keypad Entry
A keypad mounted on a gooseneck pedestal or gate column lets family members enter a code instead of carrying a remote. We see a lot of Highland Park homes where the keypad still works but the wiring underneath has corroded over 15 or 20 years in the Texas heat, causing intermittent failures. Our technicians replace weatherproof keypads, run new low-voltage wiring where needed, and program individual codes so you can delete a code when a housekeeper or contractor no longer needs access.
Remote Control
Handheld transmitters and vehicle visor remotes remain the most common way Highland Park homeowners open their gates. When a remote stops working, it’s usually the battery, but not always. We test the receiver in the operator, check the antenna placement, and verify that the remote’s frequency and rolling code are still synced before selling you a replacement you may not need.
Phone Entry
A phone entry system lets a visitor press a button at the gate, which dials your cell phone or house phone. You press a digit on your phone keypad and the gate opens. This is the kind of system older estate gates in Highland Park were built with, and we still service them regularly. We install and program new phone entry systems, including cellular-based units that don’t require a landline, which is important since many homeowners here have dropped their copper phone lines.
Card Reader
Proximity card readers are common on Highland Park properties where staff, landscapers, or delivery services need regular access. We install readers that work with key fobs or RFID cards, and we program each credential individually so you can issue and revoke access without changing the hardware. If you already have a card system from a previous owner, we can usually reprogram it without ripping out the existing equipment.
Video Intercom
A video intercom adds a camera at the gate so you can see who’s asking to come in, on a monitor inside the house or on your smartphone. In Highland Park, where driveways can be long and gates may sit 200 feet from the front door, video intercoms save you the walk and more importantly, let you verify the visitor before you open up. We install hardwired and Wi-Fi video intercom systems and integrate them with your existing gate operator.
Smart Access
Smart access systems let you open and monitor your gate from a smartphone app, from anywhere in the world. You can see when the gate opened, who opened it, and open it remotely for a delivery driver while you’re at work. We configure smart controllers that work with your existing operator and make sure the app is set up and tested before we leave, so you’re not left fumbling with the manual at 9 p.m.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Access Control
We’re trained and equipped on nine major gate automation brands, and that matters when it comes to access control. A keypad has to communicate with the operator, and every brand does that a little differently. We stock OEM parts and have decades of field notes on how each brand behaves in Highland Park’s heat, humidity, and occasional ice storms.
Linear is the brand we see most often on older Highland Park estates. Their receivers and keypads are rugged, but the factory programming can be fiddly, and we know the sequences by heart. BFT builds access control components designed for European-style gates, and we service their systems on a number of properties near Lakeside Drive and Armstrong Parkway, alongside our Gate Access Control in Dallas coverage. Ghost Controls is popular on newer installations, especially with homeowners who want app-based control without replacing their entire operator. Whether you have one of these brands or something else entirely, we can diagnose it on the first visit.
Signs You Need Gate Access Control Right Now
- Your keypad works sometimes, not every time. Intermittent keypads are usually a wiring or ground fault, not a dying battery. Left alone, that intermittent failure becomes a total failure, typically at the worst possible time. We can trace and repair it before the gate refuses to open when you’re late for an appointment.
- The remote only works when you’re right next to the gate. Short range usually means a damaged antenna, a weak receiver, or interference from newer electronics in the area. Our technicians can extend the antenna or relocate the receiver so the remote works from the street where you actually use it.
- You’re still using the same code the previous owner had. We run into this on nearly every estate gate we service in Highland Park. If the prior owners, their staff, or their landscapers still know the code, that’s an open invitation. We’ll reprogram your codes and delete every credential you didn’t create.
- Your phone entry system still needs a landline. Copper phone lines are disappearing, and if yours is scheduled for retirement, the gate phone will stop working. We can move you to a cellular phone entry unit that uses no landline at all, and you won’t lose any functionality.
- Visitors can’t hear you, or you can’t hear them. If the intercom audio has turned scratchy or one direction has gone silent, it’s often a corroded connection or a blown speaker in the entry panel. We repair and replace these components instead of telling you to buy a whole new system.
Our Gate Access Control Process - Step by Step
- 1
Talk to a live person, explain what’s happening. Call (936) 277-6521 any hour, any day. You’ll speak to a person, not a recording. We’ll ask what the gate is doing, what components you have, and when it started. Then we’ll schedule a visit that works with your day.
- 2
On-site diagnosis with the right tools. Our technician arrives in uniform, with a truck stocked for gate work, not a generic service van. We use multimeters to load-test circuits, signal testers to verify receiver output, and brand-specific diagnostic sequences to pull error codes from the operator. We find the actual fault before we touch a screwdriver.
- 3
Upfront price, agreed before work begins. Once we know what’s wrong, we write it down and quote a firm price. That price includes parts, labor, and any programming or configuration needed. You approve it before we start. There is no hourly meter running and no surprise line item at the end.
- 4
The repair or installation, done correctly the first time. We complete most access control jobs in a single visit because our trucks carry the common parts and our techs carry uncommon experience. We test everything, not just the part we replaced. The keypad, receiver, operator, and safety edges all get checked before we call the job done.
- 5
The 90-Day Done Right Promise, in writing. Every access control job we finish is covered by the Keystone Standard: our written guarantee that if it’s not right, we return and make it right, no paperwork, no arguing, no exceptions. Victor Salinas stands behind the 400th job the same way he stood behind the first one in 1984.
How Much Does Gate Access Control Cost in Highland Park?
A new keypad entry system in Highland Park typically runs $450 to $900 installed, depending on whether we can reuse existing wiring or need to run new low-voltage cable from the gate to the operator. Phone entry systems range from $800 to $1,800, with cellular units at the higher end since the hardware itself costs more. Video intercom systems start around $1,200 for a basic single-camera setup and reach $2,800 or more for multi-camera systems with smartphone integration. Card readers typically run $600 to $1,200 per entry point. Smart access controllers that work with your existing operator usually cost $500 to $1,500 installed.
What moves the price: the distance from the gate to the house or operator cabinet, the condition of existing wiring, whether the gate column is brick or metal, and which brand of operator you’re connecting to. Older operators sometimes need an interface module, which adds to the parts cost. We quote a firm price before we begin, and that price does not change unless you ask us to add work. We also offer a Free Second Opinion on Any Written Estimate, so if you’ve been quoted by another company, bring it to us and we’ll review it line by line.
A few other ways to save: we have a standing $50 Off Any Repair Over $250 offer, an $89 Seasonal Tune-Up, and a permanent 5% Senior and Veteran discount. Call (936) 277-6521 for an exact quote. Estimates are free.
Gate Access Control Near Highland Park - Our Service Area
We serve Highland Park and the surrounding communities, including University Park, North Dallas, Lakewood, Oak Cliff, Farmers Branch, Addison, Irving, Far North Dallas, Mesquite, and Balch Springs. For a sense of the broader region, see our pages on Gate Access Control in Dallas and Gate Access Control in Balch Springs. In Highland Park proper, we can usually have a technician to your driveway within 24 to 48 hours for non-emergency work, and sooner for emergency lockouts or security failures. Gate Access Control in Highland Park is the work we do every day, in the neighborhoods we know by name.
Serving Highland Park, TX - Our Local Coverage Area
We’re based in the Highland Park area and know this community well, including our Gate Access Control - Irving service area. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Access Control in Highland Park
Gate access control is the system that determines who can open your gate and how. It includes keypads, remotes, phone entry systems, card readers, video intercoms, and smartphone-based smart access. The goal is simple: only the people you authorize get through, and you can add or remove people without changing your gate.
Most keypad, remote, and card reader installations are completed in one visit, typically two to four hours. Phone entry and video intercom systems sometimes take a half day, depending on the wiring run from the gate to the house. We’ll give you a realistic timeframe when you call, and we keep it.
Prices range from $450 for a basic keypad to $2,800 or more for a full video intercom with smart access. The best way to get an accurate number is to call (936) 277-6521 and describe what you have and what you want. The estimate is free, and the price we quote is the price you pay.
Yes. We’re trained and equipped on nine major gate automation brands, including Linear, BFT, Viking, and Ghost Controls. Our trucks carry OEM parts for these brands, and our techs know the programming sequences by heart. If your brand isn’t one of those, we almost certainly still service it.
For Emergency Gate Access Control in Highland Park, TX like a gate that won’t open at all, or a keypad that has failed and left you stuck inside or out, call (936) 277-6521. A live person answers 24 hours a day, 7 days a week. We’ll get a technician to you as fast as the schedule allows, and we’ll tell you honestly when to expect us.
Every access control job we complete is protected by our 90-Day Done Right Promise, in writing. If something isn’t right, we come back and make it right. No paperwork, no arguing, no exceptions. That’s the Keystone Standard, and it applies to every job, every time.
If you know where your gate operator is, that helps. If not, don’t worry, we’ll find it. It’s also useful to have your existing remotes, codes, and any app logins handy so we can test the full system. Other than that, just be there to let us in, and we’ll handle the rest. Call (936) 277-6521 to schedule.
Schedule Your Gate Access Control Service in Highland Park Today
If your keypad is flaking out, your remote barely works from the curb, or you want to finally control your gate from your phone, call (936) 277-6521. A live person will answer, day or night, and we’ll schedule your free estimate at a time that works for you. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Highland Park since 1984.