Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Addison
Gate installation in Addison costs $2,800 to $9,400 for most residential jobs, depending on the gate type, operator, and site conditions. A standard single swing gate with a quality operator typically lands between $3,200 and $5,800. A double swing or sliding gate with automation, safety edges, and loop detectors runs $5,500 to $12,000 or more. We serve every neighborhood in Addison, from the townhome communities off Belt Line Road to the single-family streets near Addison Circle and the older subdivisions around Arapaho Road. Call (936) 277-6521 and we’ll walk the site with you, take measurements, and hand you a written price before any work is ordered.
If you’ve lived in Addison for twenty years, you know what the clay soil does to anything set in the ground here. Gates are no exception. We’ve been doing this work for over 42 years, and the foundations matter as much as the metal above them. That’s why we verify footing depth, setback clearance, and swing arc before we quote a single dollar.
Why Ironworks Gate Co. Is Addison’s Preferred Gate Installation Company
Addison homeowners call us because they want a gate that still closes square in ten years. Not one that drags in twelve months. Our technicians are background-checked and uniformed, and they work in your driveway the same way they’d work in a family member’s. That’s not a slogan; it’s our K.E.Y.S. values code: Krafted right, Every time, Your home first, Standing behind it.
We’re not a general handyman service that happens to hang a gate now and then. We’re gate specialists. That means our crews show up with the right post-hole equipment, the right operator programming tools, and enough experience with Addison’s clay soil and small-lot setbacks to flag a problem before it becomes your problem. Most installations are completed in a single visit, and every job carries a written 90-Day Done Right Promise. If it’s not right, we come back and make it right. No paperwork, no arguing.
When you call (936) 277-6521, a live person answers. Not a voicemail, not a queue. Day or night. That matters when your gate motor fails at 6:30 a.m. and you need to get out of your driveway.
Our Gate Installation Services in Addison
The link between all of these is simple: the gate has to fit your property, not the other way around. Our Gate Installation team starts every job with a site walk, not a price sheet. Here’s what we install most often across Addison.
Driveway Gate Installation in Addison
Driveway gates in Addison do double duty: they keep cars out and they signal that this is a private home, not a cut-through. On the small lots off Midway Road and near the Galleria area, most driveway gates are single swing designs that open inward. That’s fine, but only if the hinge post is set deep enough in the clay to hold weight without drifting. We set steel posts in concrete below the frost line, then hang the gate so it clears the driveway apron with room to spare at the bottom of the swing arc.
Pedestrian Gate Installation in Addison
Pedestrian gates are the ones people use every day, which means they take more wear than the driveway gate ever will. In Addison’s patio-home communities and along the streets near Vitruvian Park, pedestrian gates often share a post line with a fence or a hedge, so latch alignment and post anchoring become the difference between a gate that latches for years and one that needs a hip-check by spring. We install pedestrian gate frames, latches, closers, and keypad access where it’s useful.
Sliding Gate Installation in Addison
Sliding gates are the right answer when a driveway slopes up toward the house, or when the setback is too short for a swing gate to clear a car parked in the drive. That’s common in Addison’s older subdivisions, where garages sit close to the street and the driveway is a short ramp. A rack and pinion slide gate needs proper track placement, correct tension from day one, and safety photocells at both ends. Skipping any of those three creates a gate that binds, stutters, or won’t reverse when it should. We don’t skip them.
Swing Gate Installation in Addison
Swing gates are the most common gate type in Addison’s single-family neighborhoods, and the most commonly mis-installed. The failure almost always starts underground: a post set in a shallow pier of concrete leans under the gate’s weight, and within a year the gate drags on the driveway or binds at the latch. We drive steel posts to proper depth, set them square, and let the footing cure before the gate goes on. For a double swing gate, we also check the closing order and the center stop so the two leaves meet cleanly every time. Gate Installation in Addison starts with the post, not the panel.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Addison
We’re trained and equipped to work on nine major gate-automation brands, and the ones we see most often on Addison driveways are LiftMaster, FAAC, and BFT. That means when we install a gate with a LiftMaster operator or a FAAC hydraulic arm, we’re not reading the manual for the first time in your driveway. We know the wiring, the programming, the dip switches, and the failure points. We carry common parts and operator components on our trucks, so the job doesn’t stall while someone drives across town for a control board. And because we certify on the brands we install, we stand behind the automation the same way we stand behind the steel.
Common Gate Installation Problems We See in Addison Homes
Here’s what we find most often when we’re called to look at a gate that’s failing in Addison. These aren’t rare; they’re pattern-level.
- Undersized post footings in clay soil. Addison sits on expansive clay. A post set in a shallow pier shifts within the first year as the ground swells and shrinks, and a swing gate that cleared the driveway in June drags by January. We set posts below the frost line in concrete, every time.
- Missing safety photocells and edge sensors on slide gates. A sliding gate is a moving wall of steel. Without entrapment protection, it will not stop for a child or a dog. Some installers skip the photocells to shave a few hundred dollars off the bid. We won’t install an automatic gate without them, period.
- Bind at the far end of the track. On the narrow lots in Addison’s older subdivisions, rack and pinion gates are often installed without proper tension adjustment. The gate runs smooth for the first three feet, then binds at the far end and strips the gear. It’s a ten-minute adjustment if you know to do it at install.
- Sagging double swing gates with no center support. Two heavy leaves meeting in the middle put enormous strain on the posts and the hinges. When the original install skips a proper footing, the gate sags until the center latch won’t catch. We see this constantly off Belt Line Road and around Les Lacs.
Pricing for Gate Installation in Addison, TX
Gate installation is quoted per job, not off a price board, because your driveway isn’t the same as your neighbor’s. Here are the ranges we see across Addison.
- Single swing gate, manual: $1,200-$2,400
- Single swing gate with automation (operator, safety edges, remote): $3,200-$5,800
- Double swing gate with automation: $5,500-$9,500
- Sliding gate with rack and pinion, automation, and photocells: $4,800-$9,200
- Pedestrian gate with keypad or card reader: $1,100-$3,000
- Post replacement with concrete footing (per post): $450-$900
What moves the number: gate width and weight, whether we’re replacing existing posts or setting new ones, operator brand, access control (keypad, card reader, telephone entry), and whether we need to run a new power line. The price we quote is the price you pay. It’s settled before a single bolt is turned, and it includes the written 90-Day Done Right Promise. We also offer a free second opinion on any written estimate and a 5% discount for seniors and veterans. Call (936) 277-6521 and we’ll come out, measure, and give you a straight number.
We Also Serve Cities Near Addison
Our crews cover the north Dallas corridor, so if you’re in Carrollton, Richardson, Irving, or Garland, you get the same crew, the same written guarantee, and the same live person on the phone. The drive is short, and we schedule Addison jobs and the surrounding cities the same way.
Serving Addison, TX - Our Local Coverage Area
We’re based in the Addison area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Addison
Most residential gate installations in Addison take one to three days, and the concrete footing is the variable. We dig the post holes, set steel posts in concrete, and then let them cure before hanging the gate. That’s usually an overnight step. If we’re replacing existing posts, we often remove the old footing the same day and set new posts wet, then return the next morning to hang the gate and wire the operator. The gate itself goes on in a few hours once the footing is set. A slide gate with track work and automation typically runs two days. We don’t pour concrete one morning and hang a heavy gate on it the same afternoon. Call (936) 277-6521 and we’ll give you a written timeline for your specific site.
No, you don’t need a loop detector if you only ever open the gate with a remote and you never park a car in the gate’s path. But most Addison homeowners want one anyway, and here’s why: a loop detector senses a vehicle sitting over the loop wire and prevents the gate from closing on it. If you have delivery trucks, visiting family, or a car that idles in the gate’s swing arc while you check your phone, a loop detector stops the gate from hitting it. We recommend loop detectors on every automated driveway gate in Addison, especially on swing gates with short setbacks where a car may sit close to the closing arc. The cost is moderate, and it’s a lot cheaper than a bent gate leaf.
Yes, in most cases. If the steel panel is in decent shape and the sag is coming from worn hinges, a bent hinge post, or a footing that’s shifted, we can often replace the post or the hinges and re-hang the existing panel. The ground in Addison is the usual culprit: clay soil swells and shrinks, and a post with a shallow footing leans over time until the gate drags. Off Belt Line Road, we replaced a sagging double swing gate where the hinge post had no concrete footing, only a shallow pier. We drove a new steel post below the frost line, reinstalled the gate with a LiftMaster LA400 operator, and added a loop detector so the gate wouldn’t close on delivery trucks. That gate has opened clean every day since. If the panel itself is rusted through or bent, replacement is the honest call. We’ll tell you which one you’re looking at, and we won’t sell you a gate you don’t need.
Under UL 325 safety standards, a new automatic gate in Addison must include entrapment protection appropriate to the gate type: a reversing mechanism that stops and reverses the gate when it contacts an obstruction, plus photocells for a slide gate, and contact edges or a monitored safety device for a swing gate. These aren’t suggestions. A gate without them can crush a child or a pet, and no installer who knows the law should put one in without them. We install ASTM-compliant safety edges and photocells on every automated gate we build, and we test the reversal at installation. If a quote from anyone else leaves these off, ask why. Then call us at (936) 277-6521.
You can, but we rarely recommend it for a heavy double swing gate, and here’s why. Addison gets good sun, but a double swing gate is heavy. It takes real amperage to move two steel leaves through a full arc, especially against a north wind in the winter. Solar panels can charge a battery bank, but a week of overcast days or a panel shaded by a neighbor’s fence leaves the gate slow or dead. Most Addison homeowners are better served by running a dedicated low-voltage line to the operator, even if it means a short trench across the driveway. We install solar operators where the site genuinely calls for them, but for a heavy double swing gate, hardwired power is the reliable answer. We’ll give you an honest recommendation after we see the site.
Call Ironworks Gate Co. for Gate Installation in Addison
If you live in Addison and you’re thinking about a new gate, call (936) 277-6521. We’ll come out, measure your setback, check your soil, and tell you what the job actually needs. You’ll get a written price before anything is ordered. The gate will be hung square, powered correctly, and backed by a written 90-Day Done Right Promise. A live person answers the phone now.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Addison and the surrounding Dallas-Fort Worth communities for over 42 years.