Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Garland
Gate access control in Garland means keypads, remotes, phone entry, and card readers that work every single time, on gates that have been standing since the Johnson administration. Most Garland homes we visit sit in subdivisions built between the 1960s and 1980s, and the original gate hardware is long past its service life. We replace and retrofit access systems on those older swing gates every week. If you’re in Garland and your gate keypad is dead, your remote won’t pair, or you want to add phone entry so you don’t have to walk out to the curb, call (936) 277-6521. A live person answers, and we’ll get a technician to your neighborhood fast.
Why Ironworks Gate Co. Is Garland’s Preferred Gate Access Control Company
Garland homeowners don’t want to gamble on a gate company that’s been in business for three years and subcontracts the work to whoever’s available. We’ve been at this for over 42 years, founded in 1984, and we plan to be answering the phone in this area for another forty. Our crews know the specific ways Garland gates fail: the clay soil under Camelot and Duck Creek shifts every summer and winter, hinge posts move, and operators throw error codes that have nothing to do with the motor. We find the real cause before we touch the electronics.
Victor Salinas leads our team, and he’s built the company around a simple standard: every job is protected by a written 90-Day Done Right Promise. That means if something isn’t right after we leave, we come back and make it right. No paperwork, no arguing, no exceptions. Our Garland customers also know they can reach a live person 24 hours a day, 7 days a week. Not a voicemail. Not an answering service. A person.
Our Gate Access Control team is background-checked and uniformed, and they work in your driveway the way they’d work in their own mother’s. That’s the K.E.Y.S. code we follow on every job: Krafted right, Every time, Your home first, Standing behind it.
Key Takeaways
- We specialize exclusively in driveway and estate gates, including access control for older Garland subdivisions.
- Every job carries a written 90-Day Done Right Promise, no exceptions.
- Live phone support 24/7 at (936) 277-6521, no call center.
- Certified on nine gate-automation brands, including LiftMaster, FAAC, BFT, and Linear.
- Upfront pricing agreed before any work starts. Always.
Our Gate Access Control Services in Garland
Access control is more than a keypad screwed to a post. On Garland’s older gates, it usually means replacing sun-brittled wiring, upgrading an undersized transformer, and making sure the hinge post is actually solid before any smart hardware goes on. Here’s what we do for Garland homeowners.
Keypad Entry
A hardwired or wireless keypad on your gate post means you don’t have to carry a remote everywhere, and delivery drivers or family members can get in with a code you control. On 1970s and 1980s Garland gates, the original keypads are often discontinued, sun-bleached, and wired with insulation that crumbles when you touch it. We retrofit modern keypad systems onto the existing operator, and we replace the wiring and transformer if they can’t hold voltage during a cycle. A typical keypad retrofit in Garland runs $275 to $490 installed.
Remote Control
If your hand-held remote only works when you’re three feet from the gate, the problem is usually the receiver or the antenna, not the remote itself. We service and program remotes for LiftMaster, FAAC, BFT, Linear, and the other major brands. A replacement remote and receiver in Garland typically runs $180 to $320, depending on whether the existing operator is compatible or needs a new receiver module.
Phone Entry
You can add a phone entry system to an existing gate on almost any Garland property. That means a visitor at the gate presses a call button, your phone rings, and you can open the gate from anywhere. We install cellular-based phone entry systems that don’t require a landline, which matters in Garland because many older homes are dropping copper phone service. A phone entry system installed on an existing gate runs $650 to $1,200.
Card Reader
For longer driveways, HOA entrances, or properties with regular service vehicles, a card reader or proximity tag system is more practical than a keypad. We install stand-alone card readers and integrate them with your operator. A single card reader with a control module typically runs $400 to $800 in Garland, depending on whether you need keypad backup and how far the cable run is from the gate to the house.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Garland
We’re trained and equipped on nine major gate-automation brands, and in Garland we see a lot of LiftMaster, FAAC, and BFT operators on the older estate lots and newer custom builds. We stock common parts for these brands locally, so when a circuit board fails or a limit switch goes bad, we’re not waiting a week on a shipment. If your operator is throwing a code or the gate won’t hold position, call (936) 277-6521 and tell us what brand is on the gate. We’ll tell you honestly whether it’s worth repairing or time to replace.
Common Gate Access Control Problems We See in Garland Homes
These are the failures we actually see on service calls in Garland, week after week.
- Hinge post movement from clay soil. North Texas clay expands when it rains and contracts in the summer heat. On swing gates built in the 1960s and 1970s, the hinge post footing was often just a bag of ready-mix dropped in a hole. A post that’s moved half an inch will bind the gate and make the operator throw strain codes, even though the motor is fine.
- Brittle, sun-damaged operator wiring. Garland gets real sun, and wiring in the operator arm that’s been exposed for 40 years gets cracked and brittle. Adding a keypad to an older Garland gate often means replacing that wiring, not just tapping into it. Otherwise the keypad drops out mid-cycle.
- Undersized transformers that can’t hold voltage. Older Garland homes often have a transformer sized for a single remote receiver, not a keypad plus a receiver plus a loop detector. When the system pulls more current than the transformer can deliver, the keypad goes dark or the operator resets. We upgrade the transformer as part of the job.
- Worn rack and pinion strips on alley slide gates. Behind Garland’s mixed residential and commercial strips, alley slide gates commonly fail because the rack teeth are worn smooth and the loop detector in the cracked concrete apron never reliably holds the gate open. We replace the rack strip and install a new loop detector in a saw-cut channel so it actually works.
Pricing for Gate Access Control in Garland, TX
Here’s what you can expect to pay in Garland, based on our actual service calls.
- Keypad entry retrofit: $275 to $490 installed
- Replacement remote and receiver: $180 to $320
- Phone entry system: $650 to $1,200 installed
- Card reader with control module: $400 to $800
- Safety photocell pair (required on most retrofits): $120 to $250
- Loop detector replacement in existing concrete: $350 to $600
- Full access control package (keypad, photocells, wiring, transformer): $800 to $1,500
These are real ranges, not teaser prices. The price is quoted and agreed before any work starts, so you’ll never open an invoice that’s bigger than the quote. We also offer $50 off any repair over $250, a free second opinion on any written estimate, and an $89 seasonal tune-up. Seniors and veterans always get 5% off. Call (936) 277-6521 for an exact quote on your gate.
We Also Serve Cities Near Garland
Our Gate Access Control in Garland crews also cover Richardson, Mesquite, Addison, and Dallas. If you’re just outside Garland and your gate access isn’t working, call (936) 277-6521 and ask if we can get to you this week. Chances are we can.
Serving Garland, TX - Our Local Coverage Area
We’re based in the Garland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Garland
Yes. We retrofit modern keypads, receivers, and phone entry systems onto existing Garland gates all the time. The gate itself rarely needs to be replaced. What usually needs attention is the hinge post footing, the wiring, and the transformer. We handle all three as part of the retrofit. Call (936) 277-6521 and we’ll give you a straight answer on your specific gate.
We saw-cut a clean channel into the concrete, set the loop wire, and seal it with a flexible compound that tolerates the soil movement under Garland driveways. A cracked apron doesn’t have to be replaced. We can install a working loop detector in most existing concrete for $350 to $600, and the price is quoted before we start.
Yes. We install cellular-based phone entry systems on alley slide gates, including the ones behind Garland’s mixed residential and commercial strips. You don’t need a landline. The system calls your cell phone when a visitor presses the button at the gate, and you can open it from anywhere. A typical installation runs $650 to $1,200.
Every access control installation in Garland includes safety photocell installation and reversal testing on the operator, because a moving gate leaf near a sidewalk is a real hazard. We set the photocells at the correct height, test reversal force with a proper gauge, and show you how to test it yourself. If a gate doesn’t pass reversal testing, we don’t leave it in service. Safety is not optional on a 400-pound gate near a walking path.
Most modern keypad, phone entry, and card reader systems work with existing LiftMaster and FAAC operators, provided the operator itself is still sound. We’ll assess the operator before recommending anything. If the operator is twenty years old and throwing codes, we’ll tell you that too. The access control system is quoted and agreed before any work starts.
Call Ironworks Gate Co. for Gate Access Control in Garland, TX
We’ve been doing gate work for over 42 years, and we’ve seen every way a Garland gate can fail. When we fix your access control, we stand behind it in writing with the 90-Day Done Right Promise. Call (936) 277-6521 today. A live person answers, we’ll schedule a technician for your Garland home, and the price is settled before a single bolt is turned. Victor Salinas and the whole Ironworks team are ready when you are.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Garland and the surrounding Dallas-Fort Worth area for over 42 years.