Gate Parts & Welding in Addison - Made to Measure, Written Price

Fast, Reliable Gate Parts & Welding Across Addison

Gate parts and welding in Addison typically runs $180-$650 for common failures like hinge replacement, roller swaps, and post repairs, and most jobs are completed in a single visit. We dispatch crews to Addison every weekday, and a live person answers the phone around the clock at (936) 277-6521. If your gate is sagging, screeching, or refusing to close, you want a crew that knows Addison’s alleys, its clay soil, and the particular way gates fail here. That’s our work.

Call (936) 277-6521

Addison isn’t a sprawling suburb with wide setbacks and roomy easements. The commercial core is built tight, and even the residential streets off Belt Line Road and Arapaho have compact lots where a gate has to work in a narrow footprint. We’ve been doing Gate Parts & Welding work long enough to know that when a homeowner on Keller Springs Road calls about a sagging gate, the cause is usually the same thing it was three streets over: a footing that was never deep enough for the soil it sits in.

Key takeaways:

• Hinge replacement in Addison averages $180-$340 per hinge set, including alignment and load testing.
• Post replacement with a proper 24-inch or deeper footing runs $400-$850 depending on gate weight and access.
• Most parts-and-welding repairs are done in one visit. Installations are measured, priced, and scheduled.
• Every job is quoted and agreed before any work starts. The price on the quote is the price on the bill.
• The 90-Day Done Right Promise covers every completed job, in writing.

Why Ironworks Gate Co. Is Addison’s Preferred Gate Parts & Welding Company

We’ve been in the gate trade since 1984, and the work we do in Addison is the same work we do everywhere else: correct the first time, backed in writing. Victor Salinas leads our crews, and he’s built the company around one rule: the 400th job gets the same care as the first. That’s why Addison property managers and homeowners keep our number on file. When a slide gate at a warehouse off Surveyor Boulevard stops short-cycling on a Monday morning, they call us. We show up. We fix it.

Our technicians are background-checked and uniformed, and they work in your driveway the way they’d work in their own mother’s. We train on nine gate-automation brands including LiftMaster, FAAC, BFT, and Linear, so the part we bring matches the opener on your gate. Most parts-and-welding jobs in Addison are handled on the first visit. You won’t get a callback queue, a voicemail tree, or a “we’ll be out Thursday, maybe.” You’ll get a live person, a straight answer, and a written price before a single bolt is turned.

Our Gate Parts & Welding Services in Addison

Hinge Replacement

Hinges are the first thing to go on any swing gate, and Addison’s older residential gates show it. A worn hinge makes the panel drag on the latch side, which makes the opener work harder, which shortens the motor’s life. We remove the old hinge, inspect the post for rust and cracking, weld or bolt in a replacement rated for the gate’s actual weight, and re-balance the panel so the opener isn’t fighting gravity. Hinge replacement in Addison runs $180-$340 per hinge set.

Post Replacement

Post replacement is the job we see underestimated most often in Addison. The soil here is largely expansive clay. It heaves in wet springs and shrinks in dry summers. A post set in a shallow footing will lean within two or three seasons, and a leaning post tears up hinges, rollers, and racks. We cut the old post at grade, excavate for a properly sized footing, pour with rebar cage, and re-hang the gate only after the concrete has cured. Post replacement in Addison averages $400-$850.

Gate Rollers

Slide gates live or die on their rollers. On Addison’s commercial lots and alley-fed loading areas, we regularly replace rollers that have flat-spotted from carrying a gate that was never counterbalanced correctly. A worn roller causes the gate to lurch, bind, and eventually strip the rack teeth. Replacing rollers is one of the most cost-effective repairs we do; most jobs run $120-$280 including adjustment and lubrication of the track.

Custom Welding

Sometimes the part you need doesn’t exist on a shelf. A gate built in 1998 for a specific opening on a specific lot in Addison isn’t going to accept any off-the-shelf hinge or bracket made this year. We weld. We fabricate brackets, gussets, and reinforcement plates in our shop, then install them on site. Custom welding work in Addison is quoted by the job after we see the gate; most simple fabrications run $150-$400.

Trusted Brands We Service in Addison

We’re trained and equipped on nine major gate-automation brands, and if your Addison gate runs on LiftMaster, FAAC, BFT, or Linear, we have the service manuals and the parts cross-reference to fix it correctly on the first visit. We don’t guess. If we need a board, a limit switch, or a safety edge, we know exactly which revision fits your opener. That matters on Addison’s commercial gates, where a wrong part means another day of a stuck gate and another day of lost access. Most repair parts are on our trucks; specialty items arrive within a day or two.

Common Gate Parts & Welding Problems We See in Addison Homes

Addison has its own failure patterns. Here’s what we actually see in this city, street by street:

• Short-cycling operators after hinge work. When a hinge replacement changes the panel’s electrical signature, the loop detector that was tuned for the old gate weight starts reversing at the wrong moment. We retune the detector as part of any hinge job.
• Sagging cantilever slide gates. On Addison’s tighter commercial lots, the original post footing was often poured too shallow for the rail length. The result is a gate that drags at mid-span and needs rail repair every other season.
• Stripped rack-and-pinion teeth. Many Addison alley gates are mounted flush against the wall, inches from roof runoff. Water hits the rack, corrosion sets in, and the pinion chews through the softened teeth. We replace the rack section and correct the drainage path where possible.
• Rusted hinge posts below grade. The original footing cracks below the frost line, water finds the steel, and the post rusts inside the concrete. The gate leans, and the latch doesn’t line up anymore. That’s a post replacement, not a hinge adjustment.

The pattern we see across Addison is the same one: the gate was installed to a price, not to the soil it sits in. Compact slide gates with motors mounted inches from the rack punish even slight post misalignment. The rack-and-pinion wear becomes audible within months if the footing isn’t dead level. Our job is to undo that and build it so the next repair call is years away, not seasons away.

Our crew replaced a rusted hinge post on a swing gate at a warehouse off Surveyor Boulevard. The original footing had cracked below the frost line and the panel was dragging on the latch side. We cut the old post at grade, poured a new 24-inch footing with a rebar cage, re-hung the gate with sealed bearing hinges, and reset the loop detector so the LiftMaster operator stopped short-cycling. Two days later that gate swept through its full arc without a single creak.

Pricing for Gate Parts & Welding in Addison, TX

We Also Serve Cities Near Addison

Our crews serve the entire northwest Dallas-Fort Worth corridor, with dispatch coordinated from the metro office. In addition to Gate Parts & Welding in Addison, we cover Carrollton, Richardson, Irving, and Garland. If your property is on the edge of Addison and a neighboring city, call us; we’ll confirm coverage and give you a straight arrival window.

FAQs - Gate Parts & Welding in Addison