Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Carrollton
Gate Installation - Carrollton and welding usually means one of three things: a hinge post that has shifted in the clay, a slide gate dragging on settled track, or a cracked weld that is finally letting go. Most jobs we handle run between $150 and $900 depending on whether we are replacing a hinge, setting a new post, or welding a structural repair. We are Ironworks Gate Co., and we have been making gates work right for over 42 years. If your gate is dragging, leaning, or refusing to close, call (936) 277-6521 and we will send a technician to Carrollton who knows exactly what to look for.
Why Ironworks Gate Co. Is Carrollton’s Preferred Gate Parts & Welding Company
Carrollton homeowners call us because they are done guessing. A gate that will not latch is a security problem, and a gate that drags on the driveway is a safety problem waiting to happen. We answer the phone with a live person, 24 hours a day, and we show up in a uniformed truck with the right parts on board. Our Gate Parts & Welding team works on more driveway gates in Carrollton than most general contractors see in a year.
We have repaired gates in the historic downtown district, across the Creek Valley area, and out near Josey Ranch Lake and the homes along Hebron Parkway. Those neighborhoods share one thing: heavy clay soil that moves. A gate that worked fine for fifteen years can suddenly bind after one very wet spring. We know what that looks like, and we know the fix usually starts below ground, not at the hinge itself.
Our crews are background-checked and guided by the K.E.Y.S. values code: Krafted right, Every time, Your home first, Standing behind it. The 400th job gets the same care as the first, and every repair is backed by our written 90-Day Done Right Promise. No paperwork, no arguing. If it is not right, we come back and make it right.
Our Gate Parts & Welding Services in Carrollton
Hinge Replacement
Hinges on Carrollton swing gates take a beating from clay movement. When a post leans even half an inch, the hinge carries the full weight of the gate at an angle it was never designed for. We replace worn hinge pins, bent barrels, and cracked mounting plates, and we check the post alignment before we bolt anything back on. A hinge replacement job on a standard residential swing gate in Carrollton typically runs $180 to $340, depending on the hinge type and gate weight.
Post Replacement
The most common structural repair we perform in Carrollton is pulling a leaning post and setting it deeper with a proper concrete collar. The Houston Black and Trinity clay soils under this city expand when wet and shrink when dry, and a post set 24 inches deep in 1995 may not be deep enough for what the soil does now. We set new posts 30 inches deep or deeper, with rebar and a concrete collar that resists heave. A post replacement with concrete usually runs $400 to $900 depending on access and gate size.
Rail Repair
Slide gates in Carrollton neighborhoods like Indian Creek and the Rosemeade area often ride on free-standing track. When the soil underneath settles unevenly, the rail bends and the rollers bind. We straighten or splice rails, weld reinforcement where needed, and reset the roller alignment so the gate moves with one hand. Rail repair runs $200 to $550 for typical residential slide gates.
Custom Welding
Some gates in Carrollton are worth saving, even when a standard part would be a shortcut. We weld cracked operator brackets, reinforce rusted gate frames, build custom hinge mounts, and fabricate replacement pieces that match the original. Victor Salinas, our lead, has been welding steel and ornamental iron for decades, and the work is done to hold, not just to look fixed. Custom welding is quoted per job; typical bracket repairs run $120 to $300.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Carrollton
Whatever is bolted to your driveway, we are trained and equipped to service it. That includes Carrollton Gate Motor & Opener brands like LiftMaster, FAAC, Elite, Mighty Mule, BFT, Linear, Viking, Ghost Controls, DoorKing, and more. For Carrollton customers, we stock common parts in our Dallas-Fort Worth office so most repairs do not wait on a shipment. When a gate operator bracket cracks or a solenoid fails, we usually have the replacement on the truck.
Common Gate Parts & Welding Problems We See in Carrollton Homes
- Clay-heaved hinge posts: After spring rains, the clay around gate posts swells and pushes posts out of plumb. The gate starts dragging on the latch side, and the homeowner thinks the hinges are bent when the real problem is the footing.
- Settled slide gate track: Older Carrollton homes with free-standing slide gate track often see the track sink in spots as the clay dries out. The gate runs rough, then the rollers wear flat and the gate jams.
- Phantom loop trips: When a gate post shifts, the gate’s travel path changes just enough to trip the safety loops or photocells. The gate beeps, reverses, and won’t stay closed, even though the sensors look clean.
- Cracked operator brackets: The weld points on an operator bracket take the full force of every gate cycle. After ten or fifteen years of Carrollton clay movement, those welds crack and the operator starts slipping on the shaft.
Pricing for Gate Parts & Welding in Carrollton, TX
Gate parts and welding prices in Carrollton are set by job, not by a menu hidden in fine print. Here is what you can expect on a typical residential property:
- Hinge replacement: $180 to $340
- Post replacement with concrete: $400 to $900
- Rail repair, including welding: $200 to $550
- Custom welding (brackets, frames, reinforcement): $120 to $300 per piece
- Sag correction (re-hang and re-align): $150 to $400
- Slide gate roller replacement: $150 to $350
The price we quote is the price you pay, agreed before any work starts. We don’t open up a gate and then add surprises to the bill. Call (936) 277-6521 for a free estimate, and we will tell you over the phone what the job should cost and whether it is urgent.
We Also Serve Cities Near Carrollton
Ironworks Gate Co. serves homeowners across the Dallas-Fort Worth metro, including Carrollton and the surrounding communities. We regularly work in Addison, Richardson, Irving, and Garland, with the same live-answer phone line and the same written 90-Day Done Right Promise on every job.
Serving Carrollton, TX - Our Local Coverage Area
We’re based in the Carrollton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Carrollton
A leaning post is almost never fixable with welding alone. The post is moving because the clay around the footing is expanding or contracting, not because the steel is bent. We can sometimes straighten a post that is slightly out of plumb and add a concrete collar to hold it, but if the post has leaned more than about an inch or the footing is cracked, a new post set 30 inches deep is the lasting fix. Call (936) 277-6521 and we will tell you which one you are looking at.
That seasonal pattern points to the track, not the rollers. Carrollton’s clay soil shrinks when it dries out, so sections of the track drop in summer and the gate rides low. In winter, when the ground holds moisture, the track levels back out. The fix is usually to level the track, add a compacted base, and replace any rollers that have worn flat. Roller replacement runs $150 to $350 in Carrollton, plus track work if needed.
Most cracked brackets can be welded strongly enough to last, as long as the crack has not traveled into the operator housing itself. We grind the crack out, weld it hot, and reinforce the back side. If the bracket has already been welded once and failed again, or the metal is rust-thinned, a new bracket is the safer choice. We stock common brackets for LiftMaster, FAAC, and Elite operators and can usually finish the job in one visit.
The most likely cause in Carrollton is post movement that has changed the gate’s travel path, so the gate is hitting a spot it did not hit before and the safety circuit is doing exactly what it is supposed to do. We check the post alignment, the hinge geometry, and the limit settings, and we re-sweep the opener limits after any structural repair, including Gate Access Control in Carrollton adjustments. If the entrapment sensor is the problem, we test both the photocell alignment and the safety edge and replace whichever is failing.
At least 30 inches, with rebar and a concrete collar that is wider than the post hole. The old standard of 24 inches works in sandy or rocky soil, but this is Houston Black clay, and it moves. For a heavy automatic swing gate, we core down 36 inches and set the post in concrete that extends above the ground line so water cannot sit against the steel. That keeps the gate swinging straight through wet and dry seasons.
Contact Ironworks Gate Co. in Carrollton
If your gate is leaning, dragging, or refusing to stay closed, call (936) 277-6521 for a free estimate. We will answer with a live person, day or night, and tell you what the repair should cost before we ever set foot on your property. Victor Salinas and the Ironworks Gate Co. team serve Carrollton with the same care on every job, backed by a written 90-Day Done Right Promise. The company that makes a 40-year-old gate close like the day it was hung is one call away.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Carrollton and the Dallas-Fort Worth metro since 1984.