Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Irving
Gate parts and welding repair in Irving typically runs $180-$900 depending on whether we’re replacing a hinge, setting a new post, or fabricating a custom bracket. Most repairs are completed in one visit, with the price quoted and agreed before a single bolt is turned. If your gate is sagging, dragging, or refusing to latch, call us at (936) 277-6521 and a live person will answer, day or night.
We know Irving the way a neighbor knows the streets. Our crews drive MacArthur, Belt Line, and Story Road every week, and we’ve worked on gates in Las Colinas, Valley Ranch, and Bear Creek long enough to know exactly what the Trinity River floodplain does to steel and concrete. When you call, you’re not getting a dispatcher in another state. You’re getting a gate specialist who knows your soil, your weather, and your gate.
Why Ironworks Gate Co. Is Irving’s Preferred Gate Parts & Welding Company
Forty-two years of gate work means we’ve seen every way a gate can fail. We started in 1984, and Victor Salinas has built this company on a simple principle: do the job right, back it in writing, and answer the phone. The 90-Day Done Right Promise is the Keystone Standard on every job in Irving. If something isn’t right, we come back and make it right. No paperwork, no arguing, no exceptions.
Irving homeowners tend to stay put. They’ve owned their homes for twenty or thirty years, they’ve dealt with contractors who overpromised, and they don’t want to gamble on a one-truck outfit that might not be around next year. That’s why they call us. Our technicians are background-checked and uniformed. They work in your yard the way they’d work in their own mother’s. And the price is settled before work begins, so the invoice never surprises you.
We also know what the clay does here. That’s not something you learn from a manual. It’s something you learn by digging post holes in Bear Creek in June and watching what happens to a footing in February. That experience changes how we weld, how deep we pour, and how long we expect a repair to last. When you call Gate Parts & Welding in Irving, you’re hiring the company that already knows your neighborhood’s ground.
Our Gate Parts & Welding Services in Irving
Hinge Replacement
Hinge replacement in Irving most often comes down to one problem: the original hinge is undersized for the gate leaf, or it was never welded to the post correctly. We see this constantly in older Irving neighborhoods where gates were hung decades ago with thin-gauge hinges. We cut out the old weld, grind the post clean, and install a properly sized hinge rated for the weight of your gate. In Bear Creek, where clay expansion shifts post alignment, we typically recommend a barrel hinge with a grease fitting so you can maintain it through the wet season.
Post Replacement
A leaning hinge post is the most common structural failure we see in Irving, and it’s almost always the clay. Irving sits on the Trinity River’s floodplain, and neighborhoods like Bear Creek and parts of Valley Ranch are built on expansive clay that heaves seasonally. The top 18 inches of soil swells when wet and shrinks when dry, and that movement slowly walks a post out of plumb. Standard practice is a 36-inch-deep footing with rebar and proper concrete, which is often deeper than what the original installer poured. We set the post, brace it, and won’t hang the gate until the concrete has cured.
Rail Repair
A bent rail on a slide gate is more than cosmetic. It puts stress on the rollers, the rack and pinion, and eventually the operator motor. In Irving, we see rail damage from two sources: vehicles bumping the gate off its track and floodplain moisture eating through thin-gauge steel. We can straighten a rail when the steel is sound, or fabricate and weld a replacement section when it isn’t. Either way, the gate rolls true again and the Irving Gate Motor & Opener stops working against itself.
Custom Welding
Sometimes the part you need doesn’t exist on a shelf. A cracked bracket on a 1990s estate gate, a custom latch plate for a drive gate in Las Colinas, or a steel patch for a rusted bottom rail. We do custom welding in our shop and on-site in Irving. Our Gate Parts & Welding team fabricates what’s needed, fits it to the existing gate, and welds it in place. When the shape is unusual, we template it first, then cut and weld to match. You get a repair that fits your gate, not a universal part that doesn’t.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Irving
We’re certified on nine gate-automation brands for Gate Access Control in Irving, including LiftMaster, FAAC, and BFT. That means when your LiftMaster operator in Las Colinas isn’t communicating with the keypad, or your BFT slide gate in Valley Ranch has thrown a fault code, we diagnose it correctly on the first visit. We stock common parts and hardware for the brands most frequently installed across Irving, which cuts down on return trips and gets your gate working sooner.
Common Gate Parts & Welding Problems We See in Irving Homes
- Hinge post lean from clay soil expansion. The soil in Bear Creek and Valley Ranch heaves with seasonal moisture, slowly pushing posts out of plumb. The gate starts dragging on the latch side, then the hinges bind, and eventually a weld cracks under the stress. The fix is a deeper footing, not a shim.
- Rust at weld points from Trinity River runoff. Heavy rainfall sends water across the floodplain, and standing moisture accelerates corrosion where rollers and rack and pinion joints meet the gate. We grind back to clean steel, reweld, and prime and paint the repair so it doesn’t come back next season.
- Keypad entry failures from solar operator low charge. Newer construction along MacArthur Boulevard often pairs solar gate openers with keypad entry systems. During winter overcast spells, the battery bank runs low and the operator won’t fire, even though the keypad accepts the code. It reads like a welding problem, but it’s usually a power issue we can diagnose on-site.
- Broken rollers on slide gates in Valley Ranch. The flat terrain in Valley Ranch means long slide gates, and long gates put more load on their rollers. When a roller seizes or loses its bearing, the gate drags and the motor strains. We replace the roller and inspect the track so the gate runs smooth.
Our crew recently replaced a hinge post and welded a new pin on a Viking swing gate off Esters Road in Bear Creek, where the original post footing had heaved and thrown the gate out of plumb. We dug a 36-inch footing, poured with rebar, re-hung the gate, and tested the safety photocells and loop detector before leaving. Total time on site was about six hours, not a same-day rush. That’s the pace of work that lets us check everything and leave knowing the gate will close properly when the next rain comes.
Pricing for Gate Parts & Welding in Irving, TX
Here’s what gate repair actually costs in Irving:
- Hinge replacement: $180-$420 per hinge, depending on gate weight and whether we need to cut the old weld and repair the post face.
- Post replacement: $350-$900 per post, including demolition of the old footing, a 36-inch pour with rebar, and re-hanging the gate.
- Rail repair or replacement: $220-$600, depending on rail length and whether we straighten or fabricate new steel.
- Custom welding (brackets, patches, latch plates): $150-$500, quoted after we see the gate and the part.
Irving labor rates run slightly lower than Addison or Richardson, but the bigger cost driver is your gate’s weight and the condition of the existing posts. Every quote includes the full price up front. You approve it before we start. We stand behind the work with the written 90-Day Done Right Promise. Call (936) 277-6521 for a free estimate.
We Also Serve Cities Near Irving
Beyond Irving, we regularly serve gate repair and welding jobs in Irving‘s neighboring communities, including Dallas, Addison, Carrollton, and Richardson. If you’re just outside the Irving city limits, call us. If your gate is inside our service reach, we’ll be there when we say.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Irving
Because the clay soil under your hinge post absorbed water, expanded, and shifted the post out of plumb. When the post moves even half an inch, the gate leaf drops on the latch side and drags along the ground. The fix is resetting the post in a deeper footing, typically 36 inches with rebar, so it won’t heave again next wet season. Call (936) 277-6521 and we’ll get eyes on it.
Yes, in most cases. If the rack section is cracked or the bolts have wallowed out the mounting holes, we can weld the rack back to the gate frame or install a replacement section matched to your existing teeth pitch. We only recommend replacing the full rail when the rack is worn to the point of skipping. We’ll tell you which one you need and quote it before work begins.
No, it’s a safety system problem, not a welding problem. Your gate’s safety photocells or loop detector aren’t telling the LiftMaster operator that a vehicle is in the gate path. That’s a serious safety concern, and we recommend keeping the gate in manual mode until a technician has tested the safety edges and reversal function. We service LiftMaster, FAAC, BFT, and six other brands across Irving, and we can diagnose this on the first visit.
Thirty-six inches, minimum. Irving sits on expansive clay from the Trinity River floodplain, and shallow footings set in the top 18 inches will heave with seasonal moisture. We dig deeper, set the post in concrete with rebar, and brace it until it cures. That’s the difference between a post that lasts ten years and one that starts leaning after two.
Yes, and we usually do. A sagging gate is almost always a hinge or post problem, not a gate leaf problem. We replace the worn hinge, reset the post if it’s out of plumb, and weld any cracks in the frame. The gate gets hung straight again. If we find the gate frame itself is too far gone, we’ll say so plainly and show you why. Either way, the price is agreed before any work starts.
Call Ironworks Gate Co. for Gate Parts & Welding in Irving
If your gate is sagging, rusting, or failing to close, call us for Gate Installation - Irving or repair at (936) 277-6521. A live person answers 24 hours a day, 7 days a week. We’ll schedule a time that works for you, show up when we say, quote the job before any work begins, and stand behind it in writing. Ask about the standing offers: $50 off any repair over $250, a free second opinion on any written estimate, the $89 seasonal tune-up, and the permanent 5% senior and veteran discount. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Irving with gate parts and welding expertise.