Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Irving, TX
An iron driveway gate that groans halfway open, then stops dead, is more than a nuisance in Irving. It’s a security gap on a property you’ve likely owned for decades. We’re Ironworks Gate Co., and we fix gates the way they should have been built in the first place. Call (936) 277-6521 and you’ll reach a live person, not a recording. Most repairs in Irving are completed in a single visit, with the price agreed upon before we turn a single bolt.
We work on every part of the system: the hinge that squeals, the motor that quit, the keypad that won’t accept a code, the weld that finally gave way. No call center. No subcontractors. Just our own background-checked technicians, in uniform, who treat your driveway like it’s their mother’s.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Irving Homeowners Choose Ironworks Gate Co.
We’ve been in this trade since 1984, and we plan to be here another forty years. That matters in a city like Irving, where homes in Valley Ranch, Las Colinas, and the Heritage District have gates that were hung twenty or thirty years ago and are now showing their age. Homeowners here don’t want a handyman who “can probably figure it out.” They want a gate specialist who has already figured it out, thousands of times over.
Our home office coordinates scheduling for our Irving crews from the Dallas-Fort Worth metro, which means a technician can be at your driveway fast, often the same day for repair calls. Every job carries our 90-Day Done Right Promise in writing. If it isn’t right, we come back and make it right. No paperwork, no arguing, no exceptions. We call it the Keystone Standard internally because it holds everything else up.
Irving homeowners also tell us they value the 5% Senior and Veteran discount we’ve offered for years. Many of our customers have lived in the same house since the 1980s or 1990s. They remember contractors who overpromised and underdelivered. We built this company for them.
Gate Repair Services We Offer in Irving
Gate Repair
A sagging gate, a bent track, a broken weld, a post that’s leaning after years of North Texas clay shifting. These are the calls we make daily in Irving. We diagnose the actual cause, not just the symptom, and we fix it so it stays fixed. Learn more about our Gate Repair in Irving.
Gate Installation
Not every gate is worth saving. Sometimes the steel is thin, the design is wrong for the slope of the driveway, or the track was installed by someone who didn’t understand drainage. We build and hang gates that close like they were born to it, with hardware sized for decades of use. Learn more about our Gate Installation in Irving.
Gate Motor & Opener
We service nine automation brands, including Linear, Viking, and Ghost Controls, so the correct fix happens on the first visit, whatever is on your driveway. Motors fail for specific reasons: capacitor wear, limit switch drift, board damage from power surges that come with Irving’s spring storms. We know which one you’re dealing with. Learn more about our Gate Motor & Opener service in Irving.
Gate Access Control
Keypads, intercoms, vehicle sensors, telephone entry systems - our Gate Access Control - Irving services cover them all. If your gate needs to know who’s coming and who’s not, we wire it correctly and program it so it works every time. This is the part of the job where cheap work shows up fastest. We don’t cut corners on the low-voltage wiring, because that’s where most access problems start.
Gate Parts & Welding
We fabricate and fit the parts that keep older gates alive: custom hinges, latch plates, frame reinforcements. When a gate from the 1990s has a crack in the frame at the hinge point, Irving Gate Parts & Welding expertise tells us the right fix is a weld and a gusset, not a whole new gate. That’s the kind of judgment that comes from four decades at the workbench.
Neighborhoods We Serve in Irving
Our technicians work across Irving weekly: Valley Ranch with its long gated entrances, Las Colinas with a mix of estate properties and townhome communities, the Heritage District with its older, character-filled homes, and the neighborhoods along MacArthur Boulevard and Belt Line Road. We’re also available in the Dallas service area. Typical response time for a repair call is same-day or next-day, depending on when you call.
- Valley Ranch
- Las Colinas
- Heritage District
- University Hills
- MacArthur Boulevard corridor
Why Irving’s Climate & Housing Affect Gate Repair
Irving sits on expansive clay soil, the same Blackland Prairie gumbo that plagues foundations across North Texas. It swells when it rains and contracts during summer drought. For a driveway gate, that means the gate post shifts a few degrees over time, and suddenly the gate no longer closes square against the latch. Homeowners in Las Colinas and Valley Ranch see this every year: a gate that worked fine in January drags on the ground by August, simply because the post moved.
Add in the weather pattern: spring storm fronts with lightning that sends surges through gate opener circuit boards, summer heat in the triple digits that cooks capacitors and degrades wire insulation, and occasional ice events that strain motors until the gear strips. An Irving gate has a harder life than one in a more forgiving climate. We size parts and set clearances with that in mind. If the gate clears the ground by exactly one inch, it’ll scrape in July. We build in the room it needs.
Pricing for Gate Repair in Irving
Here’s what we charge, stated plainly before any work begins. A service call to diagnose the problem is included with the repair, and you’ll approve the total price before we start. No surprises on the bill, ever.
| Service | Typical Range |
|---|---|
| Hinge or weld repair | $180 - $420 |
| Opener board or limit switch replacement | $240 - $540 |
| Track realignment (post shifting) | $160 - $350 |
| Keypad or access control replacement | $190 - $480 |
| Seasonal tune-up (9-point inspection) | $89 |
Current offers: $50 off any repair over $250 and a Free Second Opinion on any written estimate. Seniors and veterans always receive 5% off.
Service Area - Cities Near Irving
Our crews also serve neighboring communities. You can find the same pricing and guarantee in Dallas, Addison, Carrollton, and Richardson. If you’re on the edge of town, call us and we’ll tell you straight whether we’ll take the job.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Irving
Most gate repairs in Irving fall between $160 and $540, depending on whether the issue is mechanical (hinges, welds, tracks) or electronic (boards, keypads, sensors). A full replacement opener runs higher. We quote the exact price before work starts, and the $50-off offer applies to any repair over $250. Call (936) 277-6521 for a free estimate.
In most cases, yes. Most single-visit repairs, like a hinge replacement or a limit switch adjustment, are finished the day we arrive, and we carry common parts for Linear, Viking, and Ghost Controls systems on the truck. Call (936) 277-6521 early in the day and we’ll tell you exactly when we can be there.
Irving’s clay soil shrinks and swells with moisture changes, which shifts gate posts enough to throw the entire gate out of level. We reset posts with proper footings and set clearances generously enough to ride out the seasonal movement. It’s the most common Irving-specific repair we do.
Yes, we handle the full low-voltage run from panel to motor, plus photoelectric safety edges, loops, and wireless controls. Automation work involves both line voltage and moving machinery, so this is work for a trained technician, not a general handyman. We recommend against DIY repairs on motors, control boards, and anything under spring or mechanical tension.
Every repair, install, and automation job we do. If anything we touched fails within 90 days because of our workmanship or parts, we return and fix it at no charge. It’s a written guarantee, and we don’t make you file paperwork to get it honored. That’s the Ironworks standard, and it applies the same in Irving as anywhere else we work.
Call Ironworks Gate Co. for Gate Repair in Irving
If your gate is acting up, call (936) 277-6521. A live person answers, day or night, and we’ll schedule a free estimate for installation or get a repair visit on the calendar. Done right and backed in writing. That’s the whole promise.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Irving, TX.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Irving Customers Say
"Used them at two properties now. Both times they diagnosed it on the first visit instead of guessing and coming back."
- Rohan Shah"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and put a surge protector on the line so hopefully it does not happen again."
- Layla Haddad"Our slide gate had been dragging for months and getting worse. The chain was stretched and a guide roller had seized. Both replaced, and he reset the limits so it stops properly at each end now."
- Veronica Ramirez