Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Carrollton, TX
A gate that won’t open, a motor that grinds and stops, a weld that finally let go after thirty years of Texas sun. If you live in Carrollton, you’re probably dealing with one of those right now, and you want someone who will answer the phone and actually show up. That’s what we do at Ironworks Gate Co. Give us a call at (936) 277-6521 and a live person picks up, 24 hours a day. We know Carrollton’s older subdivisions and its newer builds, and we’ll give you an honest read on the problem before we touch a single bolt.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Carrollton Homeowners Choose Ironworks Gate Co.
Most of our Carrollton customers have lived in their homes for twenty years or longer. They’ve seen the handyman who “can probably fix it,” and they’ve paid for that lesson. Homeowners around Castle Hills and Indian Creek call us because we do one thing: gates. Driveway gates, estate gates, the automation that runs them, and the welds that hold them together. Gate repair in Carrollton comes with a written 90-Day Done Right Promise on every job. If it isn’t right, we come back and make it right. No paperwork, no arguing.
Victor Salinas leads our team, and the work is done by background-checked, uniformed technicians who treat your driveway the way they’d treat their own mother’s. We trained on nine opener brands, so whatever is on your property, the right fix usually happens on the first visit. And our Carrollton customers tell us the same thing: the price quoted before the work starts is the price on the invoice. No surprises.
Gate Repair Services We Offer in Carrollton
Gate Repair
Sagging gates, broken hinges, bent frames, failed welds. We diagnose the real cause, not just the symptom, and we repair it so it stays repaired. Learn more about our Gate Repair in Carrollton.
Gate Installation
We measure, order, weld, and install. Whether you’re replacing an old gate on a 1970s ranch in Carrollton or adding a new one to a newer build, you can count on our Gate Parts & Welding in Carrollton to get it right: measured carefully, priced in writing, installed correctly.
Gate Motor & Opener
When the motor groans or won’t respond to the remote, we work on LiftMaster, FAAC, BFT, and Linear systems, among others. We fix the motor or replace it, and we calibrate it so the gate closes smoothly and stops where it should. Learn more about our Gate Motor & Opener in Carrollton.
Gate Access Control
Keypads, intercoms, telephone entry, vehicle sensors. We install and repair the Gate Access Control - Carrollton systems that let the right people in and keep everyone else out.
Gate Parts & Welding
We keep hard-to-find brackets, hinges, rollers, and receiver boards in stock, and our welders can fabricate what isn’t available anymore. Learn more about our Gate Installation in Carrollton.
Neighborhoods We Serve in Carrollton
We work across Carrollton every week, and typical response time for most of the city is same-day or next-day, including our Richardson service area. Here are a few neighborhoods we know well:
- Castle Hills
- Indian Creek
- Homestead
- Wellington Run
- Trinity Mills
If you don’t see your neighborhood listed, call anyway. We’re likely already working nearby.
Why Carrollton’s Climate & Housing Affect Gate Repair
Carrollton sits on heavy clay soil, and anyone who has lived here through a dry summer knows what that means: the ground moves. It shifts and contracts under the gate posts, which is why we regularly see gates in Trinity Mills and along Hebron Parkway that stop latching in August simply because the posts have settled out of plumb. Older subdivisions built in the 1970s and 1980s also have a lot of original steel gates that were welded well but never repainted, and after forty years of North Texas heat and spring hailstorms, the rust eats them from the bottom rail up. Add in the wind that comes straight down Highway 190 with nothing to slow it, and you get gates that slam, latches that snap, and motors that strip themselves trying to fight a gate that no longer closes square. These aren’t generic gate problems; they’re Carrollton problems, and we see them every week.
Pricing for Gate Repair in Carrollton
Here’s what gate work in Carrollton typically runs. These are honest ranges we quote from, so you can plan before you call:
- Service call and diagnosis: $89, credited toward the repair if you approve the work.
- Hinge or latch replacement: $150 to $320, depending on hardware and welding time.
- Motor or opener replacement: $350 to $1,100, depending on brand and gate weight.
- Full gate installation: $1,800 to $6,000+, depending on material, size, and automation.
Every quote is given and agreed before work begins. We currently offer $50 Off Any Repair Over $250 and a Free Second Opinion on Any Written Estimate. Seniors and veterans always get 5% off.
Service Area - Cities Near Carrollton
We also serve homeowners in nearby cities. If you’re in Addison, Richardson, Irving, or Garland, we’re a phone call away. Our crews serve Carrollton locally, with dispatch coordinated from our Dallas-Fort Worth office.
Serving Carrollton, TX - Our Local Coverage Area
We’re based in the Carrollton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Carrollton
In most cases, yes. We keep same-day slots open for emergency gate repairs in Carrollton, and a live person answers the phone 24/7 at (936) 277-6521. If it’s not an emergency, we’ll schedule the first available time that works for you.
A gate motor or opener replacement in Carrollton typically runs $350 to $1,100, depending on the brand, gate weight, and whether the arm or mounting hardware needs to be modified. We’ll quote the exact price before we start, so there are no surprises. Call (936) 277-6521 for a free estimate.
We service nine major brands in Carrollton, including LiftMaster, FAAC, BFT, and Linear, plus several others. Whatever opener is on your driveway, we’re trained on it and likely carry parts for it in the truck.
That’s a fair question, and we’ll give you an honest answer, even if the honest answer is “replace it.” We can assess the condition of the steel, the hinges, and the motor, and tell you what it costs to repair versus what a new gate installation in Carrollton would run. You decide with real numbers in front of you.
Yes. Our technicians are trained to run power to the gate, install and align safety edges and photo eyes, and make sure the system meets current code. Gate motors and wiring carry real voltage, and this is not a job for a handyman with a YouTube tutorial. We handle it correctly from the start.
If your gate won’t open, won’t close, or just doesn’t work the way it used to, call Ironworks Gate Co. at (936) 277-6521 for a free estimate. A live person answers, and we’ll be there when we say.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Addison, TX, Carrollton, and the surrounding Dallas-Fort Worth area.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Carrollton Customers Say
"Used them at two properties now. Both times they diagnosed it on the first visit instead of guessing and coming back."
- Rohan Shah"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and put a surge protector on the line so hopefully it does not happen again."
- Layla Haddad"Our slide gate had been dragging for months and getting worse. The chain was stretched and a guide roller had seized. Both replaced, and he reset the limits so it stops properly at each end now."
- Veronica Ramirez