Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Carrollton
An automatic driveway gate that won’t close in Carrollton usually needs a technician on-site within one business day, and the fix is often simpler than homeowners expect: a misaligned hinge, a loop detector reading phantom vehicles, or a post that shifted in expansive clay. We’re Ironworks Gate Co., and we’ve repaired and replaced gates throughout Carrollton long enough to know which problems repeat in 75006’s older platted neighborhoods and which ones surface in the newer 75007 subdivisions. Call us at (936) 277-6521, tell us what the gate is doing, and we’ll give you an honest read before anyone rolls a truck.
Why Ironworks Gate Co. Is Carrollton’s Preferred Gate Repair Company
Carrollton homeowners tend to keep their properties for the long haul. We see gates that were hung in the 1980s and 1990s still in daily use off Josey Lane, Hebron Parkway, and east of I-35, and the owners who call us usually want that gate to keep working, not to be talked into a tear-out. That matches who we are. Ironworks Gate Co. has been doing this work since 1984, with the crews, the truck stock, and the written guarantee to back a repair that stays repaired.
Our Carrollton reputation rests on a few things that don’t show up in an estimate line. Every job, whether it’s a hinge post reset on a swing gate in a 75006 bungalow or a full operator replacement in a 75007 HOA community, carries our 90-Day Done Right Promise in writing. If it’s not right, we come back and make it right. No paperwork, no arguing. Most Carrollton gate repairs are completed in a single visit because our technicians arrive equipped for nine automation brands and carry the common hinge, roller, and loop-detection parts on the truck. Service is dispatched from our Dallas-Fort Worth office, and a live person answers our phone 24 hours a day, seven days a week. No voicemail trees, no answering service.
The owner, Victor Salinas, has kept the company’s standard simple for 42 years: a square deal, an upfront price settled before a bolt is turned, and a tech in a uniform who treats your driveway the way he’d treat his own mother’s. Carrollton calls come to us for the same reason homeowners stay with a good mechanic: the job gets done correctly the first time, and if it isn’t, the fix is on us.
Our Gate Repair Services in Carrollton
We don’t do fences, patios, or general handyman work. Gate repair is what we do, and these four services cover most of the calls we run in Carrollton.
Electric Gate Repair
Electric gate problems in Carrollton break down into three broad categories: the operator isn’t receiving power, the operator is receiving power but won’t move the gate, or the gate moves but won’t stop at the right point. We test line voltage at the operator, check the battery and transformer where applicable, and run the gate through its full travel to isolate whether the fault is electrical, mechanical, or in the safety circuit. If your gate opener in Carrollton trips a breaker or the keypad lights but nothing moves, call (936) 277-6521 and describe the behavior. A live person will answer.
Automatic Gate Repair
Automatic gates fail in ways specific to how they’re built. Slide gates along Carrollton’s wider lots depend on loop detectors, rack-and-pinion sections, and limit switches. Swing gates depend on actuator arms, hinge geometry, and post stability. We service both and repair what’s actually at fault rather than swapping parts until the symptom disappears. Our technicians are factory-trained on nine opener brands including LiftMaster, FAAC, BFT, and Linear, so the first visit usually ends with the gate closing on command again.
Hinge & Post Repair
This is the most common structural repair we perform in Carrollton, and the soil is why. Carrollton sits on expansive clay that swells after rain and shrinks in drought. A gate post set without proper depth or a well-packed footer moves with the soil, and once the post leans even a few degrees, the gate binds at the hinge and the operator strains against the misalignment. Re-hanging the gate on the same leaning post won’t hold. We dig out the old footing, reset the post plumb, and re-weld or re-bolt hinges so the gate swings true. Our Gate Repair team does this work regularly in Carrollton’s older 75006 neighborhoods where original posts from the 1970s and 1980s are reaching the end of their life.
Gate Realignment
Sometimes the post is fine and the gate is fine; the problem is how they meet. A gate that has been shaved to clear a swelling driveway, struck by a delivery truck, or gradually pulled out of square by a failing operator will drag, fail to latch, or force the operator to work double duty. We measure hinge alignment, adjust the operator stroke, and correct the gate’s travel so it closes smoothly without damaging the motor. In Carrollton, we often see realignment paired with loop detector adjustments on slide gates that have drifted over years of use on asphalt approaches.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Carrollton
We work on whatever is already mounted to your driveway. Our technicians are trained and equipped on nine major automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters in Carrollton because we don’t have to tell you to replace a perfectly serviceable FAAC board with a different brand just because it’s what we stock. We repair the equipment you have, and when replacement is the honest call, we quote the right operator for your gate’s weight, cycle rate, and power access. Parts common to Carrollton’s gate stock stay on our trucks, which keeps most repairs to a single visit.
Common Gate Repair Problems We See in Carrollton Homes
- Expansive clay shifting post footings. Wet-dry cycles move Carrollton’s soil. Swing gates bind, hinge posts lean, and the gate drags at the latch point. Reset the footer properly, and the repair holds. Patch the hinge, and you’ll be calling again in eight months.
- Slide gates without working loop detectors. Many automatic gates on older Carrollton homes either never had a loop detector or the saw-cut was filled with asphalt and lost its signal. The gate refuses to close, reverses unexpectedly, or closes on a car still in the path. We re-cut the loop line, test it, and restore reliable open-and-close behavior.
- HOA-deferred safety photocell upgrades. Subdivisions in Carrollton with HOA-managed gates sometimes postpone entrapment-protection work. The result is a slide gate that closes on a delivery truck or a resident’s vehicle before the operator trips its reversal. We install and verify safety photocells and test reversal pressure so the gate meets current UL 325 standards.
- Rust at the base of ornamental iron gates. Standing water at the bottom rail of a Carrollton iron gate, especially one shaded by mature live oaks in older neighborhoods, eats through the lower stile over time. We cut out the rusted section, weld in new steel, and refinish the repair so it blends. The gate panel usually doesn’t need to be replaced.
Pricing for Gate Repair in Carrollton, TX
Rates in Carrollton are consistent with the rest of the Dallas-Fort Worth metro, but we quote from the work itself, not a flat book price. A hinge and post reset on a swing gate in Carrollton typically runs $350 to $900, depending on whether the footer needs to be dug out and how much steel has to be re-welded. Electric gate repair, including a diagnostic visit and board or limit switch replacement, generally falls between $180 and $420 for most single-operator systems. A full automatic gate operator replacement in Carrollton typically spans $1,100 to $3,200, installed, for the operator and the full safety circuit: loop detector or photocells, battery backup where applicable, and reversal testing. Rust repair and weld restoration runs $150 to $600 per affected section. Every price is quoted and agreed in writing before any work begins. You will not find a surprise on the invoice. Call (936) 277-6521 for a free estimate, and ask about the $50-off-any-repair-over-$250 offer or our free second opinion on any written estimate.
We Also Serve Cities Near Carrollton
Ironworks Gate Co. serves Carrollton and the surrounding North Dallas communities. If you’re in Addison, Richardson, Irving, or Garland and your gate has stopped behaving, call the same number: (936) 277-6521. We’ll give you the same straight answer and the same written 90-Day Done Right Promise.
Serving Carrollton, TX - Our Local Coverage Area
We’re based in the Carrollton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Carrollton
The sag almost always comes from the post, not the hinge. Carrollton’s expansive clay swells and shrinks through the seasons, and a hinge plate bolted to a moving post will pull the gate out of alignment no matter how tightly the barrel hinge is pinned. The correct repair is to expose the post footing, reset it plumb, and re-hang the gate, not to replace the hinge a second time. We see this pattern constantly in 75006 neighborhoods with original 1980s gate posts. Call (936) 277-6521 and we’ll check the post before recommending any hinge work.
It depends on the gate’s sun exposure and the operator’s power draw, but the honest answer for Carrollton is that solar works on some slide gates and not others. Tall fence lines and mature tree cover in older Carrollton neighborhoods often shade the panel for too many hours, especially in winter, which drains the battery and leaves the gate dead. For a low-cycle gate with a clear southern exposure, a solar operator can work well. We’ll measure actual sun hours on your panel location before quoting, so you don’t pay for a system that can’t keep up. Estimates are free.
That’s the most likely cause, yes. When the loop detector fails or is misadjusted, the operator thinks a vehicle is still on the loop or that one is approaching, so it reverses to the open position as a safety response. A loop saw-cut that’s been filled with asphalt, as we find on many older Carrollton driveways, can also break the detector’s signal. We re-cut the loop line, set the sensitivity, and test the full close cycle. If the detector is beyond saving, replacement runs $150 to $400 installed including the saw-cut and sealant. Call (936) 277-6521 to schedule a diagnostic visit.
A proper replacement includes more than unbolting the old operator and mounting a new one. The full job covers removing the old operator, mounting and wiring the new unit, connecting or installing the safety circuit (photocells or loop detector), setting the limits and force so the gate stops and reverses correctly, and testing the entire system through multiple open-and-close cycles. On Carrollton slide gates, we also inspect the rack-and-pinion or chain drive for wear and replace worn sections rather than leaving a weak driveline under a new motor. Most operator replacements are completed in one visit. Price is quoted and agreed before parts are ordered or installed.
In most cases, yes. We grind out the rusted weld, cut back to clean steel, and weld in a new section that matches the existing profile. The repair is dressed, primed, and painted to blend with the surrounding gate. This is a common job on Carrollton ornamental gates with bottom rails that have sat in wet soil or sprinkler overspray for decades. If the rust has compromised the structural integrity of the panel to the point that patching would be unsafe, we’ll tell you straight and quote the replacement honestly. Call (936) 277-6521 and we can look at the gate in person.
Call Ironworks Gate Co. for Gate Repair in Carrollton
A gate that won’t close is a problem you should not have to think about twice. Call (936) 277-6521 and a live person will answer, 24 hours a day, seven days a week. We’ll schedule the visit, our tech will arrive in a marked truck with the parts most Carrollton gate failures require, and you’ll have the price in writing before any work starts. Every repair is covered by the 90-Day Done Right Promise, and every Carrollton homeowner 55 or older, or with a military ID, gets a permanent 5% discount. This is what Victor Salinas has stood behind since 1984: done right, every time, your home first, standing behind it.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Carrollton and the Dallas-Fort Worth metro since 1984.