Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Addison
A gate that won’t open, sags on its hinges, or faults out halfway through its cycle isn’t just an annoyance in Addison, it’s a broken promise at the edge of your property. Most gate repairs in Addison run between $175 and $450 for common hinge, operator, and alignment work, and our crews are in Addison weekly, typically reaching your driveway within one to two business days for non-emergency calls. We’re the gate specialist that owner Victor Salinas built on a simple rule: fix the actual problem, quote the price upfront, and stand behind the work in writing. Call (936) 277-6521 any time, a live person answers.
Why Ironworks Gate Co. Is Addison’s Preferred Gate Repair Company
We’ve spent 42 years working on gates across the Dallas-Fort Worth metroplex, and Addison keeps our crews honest. The housing stock here ranges from original 1970s and 80s ranches near Belt Line Road to newer estate properties east of the Tollway, and each era has its own failure patterns. Addison homeowners tend to be the kind of people who have lived with their gate for fifteen or twenty years. They know its moods. When they call us, they’re not looking for a diagnosis from a tablet, they want a technician who has seen this exact problem before and can fix it cleanly.
Our technicians arrive in uniform, background-checked, and trained on nine gate-automation brands including BFT, Linear, and Ghost Controls. We work the way we’d work on our own mothers’ homes. The 90-Day Done Right Promise is standard on every job, written, not verbal. If it isn’t right, we come back and make it right. No paperwork, no arguing. Senior and veteran homeowners in Addison always receive a 5% discount, and a regular $89 seasonal tune-up catches small problems in Addison’s clay soil before they turn into twisted hinge posts or burned-out operators.
Our Gate Repair Services in Addison
Electric Gate Repair
When an electric gate in Addison stops responding to the keypad, remote, or intercom, the fault usually sits in one of three places: the control board, the wiring at the post base, or the operator motor itself. We test each circuit before replacing anything, because swapping a $400 board when the real problem is a corroded wire nut at the post base isn’t a repair, it’s an upsell. In Addison, we regularly find unsealed low-voltage wiring that has wicked moisture up from humid spring storms, causing intermittent keypad failures and phantom reversals. A typical electric gate repair in Addison runs $160 to $320 when the fix is wiring or a sensor, and $250 to $550 if the operator control board needs replacement.
Automatic Gate Repair
Automatic gate repair in Addison covers the operator, the safety loop detectors, the photocells, and the power supply. Older swing gate operators along Arapaho Road and the streets feeding Addison Circle Park take a beating from daily cycles and the temperature swings of a North Texas summer. We carry parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule on our trucks, so most automatic gate repairs are completed in a single visit. Most jobs involving sensor alignment, limit-switch adjustment, or operator programming run $185 to $340 in Addison. If the motor itself has failed, expect $400 to $800 for a replacement unit, installed.
Hinge & Post Repair
This is the repair Addison calls us for more than any other. The clay-heavy soil beneath town expands when wet and contracts when dry, and that slow seasonal breathing pushes concrete footings out of position, year after year. A hinge post that has drifted even half an inch off plumb puts the entire gate’s weight onto the lower hinge, and then the lower hinge starts to fail, and then the operator strains against a gate that wasn’t designed to be pulled uphill. We reset post footings with additional concrete, weld or replace cracked hinge plates, and true the gate so it swings level. Hinge and post repair in Addison typically runs $220 to $480 depending on whether we’re resetting one post or fabricating new hinges, and whether your gate is ornamental steel, aluminum, or iron.
Gate Realignment
A gate that scrapes the driveway, won’t latch, or leaves a gap at the strike post needs realignment, not a new operator. In Addison’s shifting clay, sag is the common culprit, especially on the older swing gates we see along Beltway Drive and around Vitruvian Park. We re-true the gate, shim or reset the hinges, and test the operator limits afterward so the safety reverses engage at the right point in the cycle. Gate realignment in Addison runs $140 to $260 as a standalone job, and less when combined with hinge or post work.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Addison
Addison driveways run the full range of operator brands, and we’re trained and equipped on nine of them: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Because we stock common parts on the truck, we don’t have to order a replacement board and come back next week. BFT and Viking units are common on Addison’s estate lots, while Ghost Controls and Mighty Mule pop up on lighter ornamental gates throughout the neighborhoods north of Belt Line. Whatever is on your driveway, we’ll diagnose it accurately the first visit, because the correct fix bought once always beats the wrong fix bought twice.
Common Gate Repair Problems We See in Addison Homes
- Hinge posts drifting out of plumb from seasonal clay movement. Addison’s soil expands after heavy spring rain and contracts through the dry heat of July and August. The cycle shifts post footings, the gate sags, and the operator starts faulting. The fix is a reset footing and trued hinges, not a new motor.
- Rack-and-pinion wear on older slide gates. Addison’s humid spring and summer storms accelerate rust on exposed steel track and drive gears, especially on commercial-grade slide gates running along alley-access properties. Regular lubrication helps, but once the rack teeth are worn thin, it’s time for new track section.
- Corroded wiring at the post base. Unsealed low-voltage connections at the bottom of the post soak up humidity and condensation, causing intermittent keypad failures, ghost reversals, and operator dead zones. We cut back the corroded wire, seal the new connection, and eliminate the intermittent fault for good.
- Safety sensor misalignment after a bump or soil shift. When the gate closes and then reverses for no obvious reason, the photocell beam is usually broken or the loop detector has drifted. If the post has moved even slightly, the beam alignment follows it. We realign the sensor, test the reversal, and confirm the UL 325 entrapment protection is functioning before we leave.
Pricing for Gate Repair in Addison, TX
Gate repair pricing in Addison lands in a range the homeowners we serve find fair: most common repairs run between $160 and $480, with specific brackets for each class of work. Sensor alignment and limit-switch programming: $120 to $185. Hinge replacement and post brace work: $220 to $480. Operator control board or transformer replacement: $250 to $550. Full operator replacement: $400 to $800, installed, depending on the brand and horsepower. A $89 seasonal tune-up catches small problems early and is the cheapest insurance a Addison gate will ever have. Every repair price is quoted and agreed before we touch a single bolt. No surprises on the bill. Seniors and veterans always receive a 5% discount, and any repair over $250 carries a standing $50 discount. Call (936) 277-6521 for an exact quote, estimates are free.
We Also Serve Cities Near Addison
Our crews cover Addison and the surrounding communities, including Carrollton, Richardson, Irving, and Garland. If you’re on the border and your gate is acting up, call and ask. Chances are we’re already in your area that week. And if you’re comparing prices or dealing with a second opinion, our Gate Repair team offers a free second opinion on any written estimate from another company.
Serving Addison, TX - Our Local Coverage Area
We’re based in the Addison area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Addison
Because Addison sits on clay-heavy soil that expands in wet weather and contracts in dry heat, and that movement pushes post footings gradually out of plumb. A post that’s moved even half an inch transfers the gate’s load unevenly, and the sag worsens every season. The permanent fix is resetting the post in a deeper, wider concrete footing, not just re-tightening the hinge bolts. Call (936) 277-6521 and we’ll tell you over the phone whether your post needs a reset or just a hinge tune, no charge for the conversation.
If the operator is under ten years old and the motor hasn’t seized, repair is usually the right call, and it runs $160 to $320 in Addison for most board, wiring, or limit-switch faults. If the unit is fifteen years or older, replacement is often cheaper long-term, especially when parts are discontinued, and a new installed operator runs $400 to $800. We’ll give you a straight answer and a written price either way before any work begins.
Ninety percent of the time, the safety photocell beam is misaligned or the loop detector has shifted, and the operator is doing exactly what it’s designed to do, refusing to close on a broken safety circuit. In Addison, a hinge post that’s moved slightly can pull the sensor out of line, so the gate reverses every cycle. We re-align the beam, re-test the reversal function, and confirm the UL 325 entrapment protection engages properly before we leave. Call (936) 277-6521 and we’ll walk you through a quick check on the phone.
Yes, if the gate sees at least six hours of direct sun daily. Addison’s open, flat residential lots make solar a workable option for many homes south of Belt Line, and we install solar-enabled operators from Ghost Controls, Mighty Mule, and other brands as a single-visit job in most cases. Solar operators need a correctly sized battery and panel, plus consideration for the heavy clay post loads we see locally, so we size the system for your gate’s actual weight and cycle count. Ask for a free measure and a written price.
UL 325 is the safety standard that requires every automatic gate to have protection against crushing or entrapment, usually through photocells, contact edges, or both, plus a reversing mechanism that reopens the gate if something blocks its path. On any automatic gate repair in Addison, we test the entrapment protection and reversal function before we call the job done, because a gate that doesn’t reverse can seriously injure a child or pet. We won’t leave an automatic gate in service without working safety sensors, no exceptions.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Addison homeowners with straight answers and written guarantees on every gate repair.
Your gate should open and close like it was built yesterday. If it doesn’t, call (936) 277-6521 for a free estimate. A live person answers, 24 hours a day, 7 days a week, and the price we quote is the price you’ll pay. Done right, and backed in writing.