Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Farmers Branch
A new driveway gate in Farmers Branch typically runs between $3,800 and $9,500 installed, depending on whether you’re fitting a single swing panel onto an existing concrete apron or building a full sliding gate with new track and power. Most installations take one to two days on site once materials are ordered. If you’re reading this because a gate has sagged beyond repair or you’re planning to add a gate for the first time, call (936) 277-6521 and we’ll walk the property with you, measure what’s actually there, and give you a written price before any work begins.
Farmers Branch is home turf for our crews. We know the difference between a Valwood Park lot with mature trees and post-2000 construction near the Dallas North Tollway, because we’ve worked both. That local knowledge means we don’t quote you a gate that won’t fit your setback or a motor that can’t handle your driveway length. We quote what works on your street, at your house, with your soil.
Key takeaways:
- Written, upfront pricing agreed before work starts. No surprises on the invoice.
- Installation includes footings, power, safety testing, and a 90-Day Done Right Promise in writing.
- We schedule installations properly. We do not promise same-day installs; we promise a measured, scheduled job done once, done right.
- A live person answers our phone 24/7. Not an answering service. Call (936) 277-6521.
Why Ironworks Gate Co. Is Farmers Branch’s Preferred Gate Installation Company
We’ve been in this trade for over 42 years, founded in 1984, and we plan to be working in Farmers Branch for another forty. That matters because a gate is a long-term fixture. The company that installs it should be one you can call in six years when the operator board fails, not one that has disappeared with your number.
Farmers Branch homeowners tell us the same thing in different words: they’ve been let down by contractors who showed up late, quoted one number and billed another, or left a job with loose bolts and a gate that scraped the driveway. Victor Salinas runs Ironworks Gate Co. with a simple rule: the 400th job gets the same care as the first. Background-checked, uniformed technicians work in your home the way they would work in their own mother’s yard. Every job, including yours, is covered by our written 90-Day Done Right Promise. If it isn’t right, we come back and make it right. No paperwork, no arguing.
Our scheduled response to Farmers Branch is dependable. When we say we’ll be there Tuesday at eight, we are there Tuesday at eight. For measurement and quote visits, we typically reach most Farmers Branch neighborhoods within a few business days depending on crew routing. Live phone support is 24/7, every day of the year.
Our Gate Installation Services in Farmers Branch
We specialize exclusively in driveway and estate gates. That’s the whole shop. Repair, installation, motors, access control, welding. When you call us about a gate, you’re not getting a handyman who also does gutters. You’re getting a Gate Installation team that only works on gates.
Driveway Gate Installation
Most Farmers Branch driveways are 10 to 12 feet wide, which puts a single swing gate or a compact sliding gate within easy reach. We measure the apron, check the post foundations, and build to fit what’s there. For dual-lane driveways common on the west side near the Tollway, a double swing or single sliding panel with a longer track is usually the better call.
Pedestrian Gate Installation
Pedestrian gates give you a way through without having to open the whole driveway. In Farmers Branch, many side yards have brick or wood fence lines and a narrow walk space. We build gates that match the fence, swing the direction your yard actually allows, and latch properly on the first hang.
Sliding Gate Installation
Sliding gates are the right answer on many older Farmers Branch lots where the driveway slopes toward the street or where a swing gate would hit a brick column or landscaping. A slide gate needs a flat track run and a post at the receiving side. We check both before we quote. No surprises later.
Swing Gate Installation
Swing gates work beautifully on flat driveways with enough setback. The catch in Farmers Branch is the clay soil. A shallow post footing shifts, the gate sags, and within a year the panel is scraping concrete. Our installs use footings deep enough to survive seasonal moisture swings. We’ll tell you plainly if a swing gate is right for your lot or if a slide gate is the honest answer.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Farmers Branch
We install and service operators from LiftMaster, FAAC, BFT, and Linear, and our technicians are trained on nine major gate-automation brands including DoorKing, Elite, Viking, Ghost Controls, and Mighty Mule. That breadth exists for a reason. A Farmers Branch homeowner with a 1998 FAAC opener and a neighbor with a new LiftMaster both deserve someone who knows their machine on arrival. We stock common parts and boards for these brands, which shortens turnaround when a repair is needed. When you buy an operator from us, you’re buying something we can actually support for the next decade.
Common Gate Installation Problems We See in Farmers Branch Homes
- Posts out of plumb from clay-heavy soil. Farmers Branch sits on clay that swells when wet and shrinks when dry. Footings poured shallower than about 24 inches will shift within a year, and a shifted post destroys gate alignment. We pour deep footings with proper drainage as standard practice.
- No power at the driveway. Builders in older Farmers Branch neighborhoods often ran electrical only to the garage, not out to the gate line. We regularly see gates wired with undersized extension cords that trip breakers or cook control boards. A proper installation means a dedicated circuit, not a cord draped across the flower bed.
- Wood gates hung on unreinforced brick columns. Many original wood driveway gates in Farmers Branch were simply bolted to brick pillars with no steel post core inside. Add a gate operator and the torque rips the hinge post loose from the brick. We add a steel post core or rebuild the column before mounting the operator, so the gate doesn’t tear its own mount apart.
- Operator chosen by price, not by application. A $400 opener from a big-box store may run a light 8-foot gate, but it will strain on a 14-foot double panel. We size the operator to the gate weight, width, and daily cycle count, not to the price tag.
Pricing for Gate Installation in Farmers Branch, TX
| Gate Type | Typical Farmers Branch Price Range |
|---|---|
| Single swing gate, steel or aluminum, manual | $1,800-$3,200 |
| Single swing gate with operator and keypad | $3,800-$6,500 |
| Double swing gate, automated | $5,500-$9,500 |
| Sliding gate on track, automated | $4,200-$8,000 |
| Pedestrian gate with latch and closer | $900-$2,200 |
| Keypad entry system added to existing operator | $500-$1,200 |
Those ranges are honest numbers for Farmers Branch, not national averages. What moves a price: gate width and weight, whether you need new footings or you can reuse existing posts, whether power is already at the driveway or we need to run a dedicated circuit, and whether you’re adding access control like a keypad or intercom. We quote before we touch a single bolt. The price we hand you in writing is the price you pay. We do not add discovery fees, fuel surcharges, or “we didn’t see that coming” add-ons. If we find a hidden issue during install, we stop and talk to you first. You approve, then we continue.
Call (936) 277-6521 for a free estimate. We’ll measure, walk the layout with you, and leave you a written price you can think about.
We Also Serve Cities Near Farmers Branch
Ironworks Gate Co. is a Farmers Branch gate installation company that also handles jobs in neighboring cities. Our crews regularly work in Highland Park, Dallas, Balch Springs, and Mesquite. If you’re a few minutes outside the Farmers Branch line, call anyway. We likely already have a truck near you. Scheduling is coordinated from our Dallas-Fort Worth office, and the same written pricing and Done Right Promise apply anywhere we hang a gate.
Serving Farmers Branch, TX - Our Local Coverage Area
We’re based in the Farmers Branch area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Farmers Branch
You need at least the full gate-width of flat, level ground behind the hinge line for a swing gate to open. For a 10-foot gate, that means roughly 10 feet of clear, level setback. On many older Farmers Branch lots with 0.15 to 0.3-acre yards, the parking apron butts right up against the house line, which means a swing gate would hit a car or a brick planter before it swings fully open. When setback is short, we recommend a sliding gate, which needs only a few feet of track run along the fence line. We measure this before we quote, and we’ll tell you straight if your driveway was never meant to swing. Call (936) 277-6521 and we’ll check it in person.
Solar gate openers work in Farmers Branch if the gate sees good sun for most of the day and you’re not cycling it more than 10 to 15 times daily. The challenge here is tree cover. Mature post oaks and pecan trees on older lots shade many driveways for half the day, and a solar panel in partial shade will undercharge the battery until the opener fails at the worst moment. Line voltage with a dedicated circuit is the reliable choice on shaded lots. We’ll assess your sun exposure during the bid visit and tell you honestly which way to go, rather than selling you a solar kit that dies in February. Call (936) 277-6521 for a free assessment.
Yes, on most automated driveway gates in Farmers Branch you need a vehicle exit loop detector even if you have a keypad. The keypad handles entry, but a loop detector buried in the driveway senses a car waiting to exit and opens the gate automatically. Without it, the gate may trap a vehicle or the operator will strain against the weight of a car sitting on the detection zone. It also provides a fail-safe so the gate does not close on a car. We install exit loops as part of any automated driveway gate installation, tested before we hand you the remote. Call (936) 277-6521 to talk through what your specific driveway needs.
In most cases we fix a sagging gate by correcting the posts and re-hanging the panel, not by replacing it. A sag means the hinge post has moved off plumb or the hinges themselves are worn. We reset the post, often by pouring a deeper footing if the original was too shallow for Farmers Branch clay, then shim and re-hang the panel so it clears the apron. We replaced a sagging double swing gate on a Valwood Park driveway where the hinge post had pulled out of a cracked footing. Our crew poured new footings 24 inches deep, installed a DoorKing 9150 operator with safety photocells, added a keypad entry, and the gate now opens and closes without scraping the concrete. In most cases, sagging is a repair, not a replacement. Call (936) 277-6521 and we’ll tell you which one yours is.
Gate operators in Farmers Branch must meet UL 325 safety standards, which means the operator needs at least one primary entrapment protection device: photocells, contact edges, or an inherent reversing sensor, depending on the operator type. Swing gates need contact edges or photocells on the closing edge; sliding gates need coverage across the full travel path. We install and test entrapment protection on every automated gate we build, and we test reversal force and sensitivity before we call the job done. Our 90-Day Done Right Promise covers this safety work in writing. Call (936) 277-6521 and we’ll make sure your gate closes on a car, not on a child.
If your Farmers Branch driveway needs a gate that will close like the day it was hung for the next twenty years, call Ironworks Gate Co. at (936) 277-6521. We’ll measure, quote a fair price in writing, and stand behind the work with our 90-Day Done Right Promise. A live person answers, day or night.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Farmers Branch with gate installation, automation, and welding for over 42 years.