Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Highland Park
Gate installation in Highland Park means working with older estates, custom ironwork, and automation systems that most general contractors never see. We’ve been called to homes off Lakeside Drive, Armstrong Parkway, and Beverly Drive where a 1930s swing gate has outlived its operator by two decades. The job is rarely a simple swap. It’s matching new hardware to original iron, setting posts deep enough to hold against shifting clay, and wiring a modern operator onto a gate that was built before safety sensors existed. If you need a gate built, hung, or automated in Highland Park, call (936) 277-6521. We quote the work upfront and we stand behind it in writing.
Why Ironworks Gate Co. Is Highland Park’s Preferred Gate Installation Company
We’ve spent 42 years working on gates across Texas, and Highland Park is its own animal. The homes here weren’t built in a decade. They were built across a century, and the gates reflect that. A 1940s double gate near Preston Road, a newer sliding gate on a rebuilt estate off St. Johns Drive, a pedestrian gate on Miramar Avenue that hasn’t opened smoothly since the 2021 freeze. Each one needs something different. Our lead, Victor Salinas, has trained our crews to assess the gate, the posts, the operator, and the soil conditions as one system. That’s why the fix usually takes one visit, not three.
Highland Park homeowners don’t call around for the lowest bid. They call for the company that won’t make them call again. Ours is the team that shows up in uniform, background-checked, and treats a driveway on Beverly Drive the same way we’d treat our own mother’s front walk. Every gate we install or automate is covered by our 90-Day Done Right Promise. Written. No paperwork, no arguing. If it’s not right, we come back and make it right.
Our Gate Installation Services in Highland Park
We handle the full scope of driveway and estate gate work in Highland Park, from cutting and hanging a new gate to retrofitting old automation. Here’s how that breaks down on the streets we work most.
Swing Gate Installation
Swing gates are the standard on older Highland Park estates. Most were custom fabricated to match the home’s original ironwork, and they ride on hinged posts set decades ago. When we install a swing gate in Highland Park, we don’t just hang the leaf. We check post plumb, weld strength, hinge wear, travel clearances, and whether the Blackland Prairie clay has moved anything since last season. A gate that drags in August needs a different install approach than one hung in March.
Double Gate Installation
Double gates are common on the wider driveways along Lakeside Drive and Armstrong Parkway. Both leaves have to meet perfectly at center, which means both posts have to be dead plumb and both operators synced. On a 1930s brick estate near Lakeside Drive, we reset a leaning hinge post for a custom wrought-iron double swing gate after seasonal clay shrinkage pulled the post inward by nearly two inches. Our crew installed a new concrete post footing with deeper embedment and recalibrated the existing Viking operator and safety photocells, restoring smooth operation without touching the original ironwork. That’s the difference between a gate company and a metal worker.
Sliding Gate Installation
Sliding gates fit tighter lots and shorter driveways. In Highland Park, several rebuilt estates on Euclid Avenue and St. Johns Drive have switched from swing to slide specifically because the driveway grade changed during renovation. A sliding gate rides on a track and cantilever rollers, and it needs a perfectly level concrete run. When we install one, we account for how that pad will settle through the first wet-dry cycle. We’d rather over-build the base now than re-track the gate in eighteen months.
Pedestrian Gate Installation
A pedestrian gate on a Highland Park property is usually part of a matched iron run along the front perimeter. When it starts sagging or the latch won’t catch, the cause is almost always the post, not the gate. We install pedestrian gates with deeper footings than the original, through-bolted hinges, and a strike plate that holds up to Dallas’s thermal swings. It’s a smaller job than a driveway gate, but it should be done with the same care. We do it that way.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Highland Park
Most of the operators we see on Highland Park driveway gates are Viking, FAAC, or LiftMaster units, often installed fifteen to twenty-five years ago. We’re trained and equipped on all three, along with six other major automation brands, so the correct fix happens on the first visit. When a control board fails on a legacy FAAC operator or a Viking arm loses its limit setting, we don’t guess. We diagnose, then we either retrofit or replace with hardware that fits the existing gate. Our Gate Installation team keeps common boards, photoeyes, and arm components stocked so a trip to Highland Park doesn’t turn into a two-week parts wait.
Common Gate Installation Problems We See in Highland Park Homes
Some neighborhoods have identical problems because the houses were built around the same time. Highland Park has its own set, because the soil and the ironwork don’t change much from block to block.
- Posts that move every summer. The Blackland Prairie clay under Highland Park swells and shrinks with Dallas’s wet/dry cycles. That shifts gate posts and footings so predictably that post realignment and operator recalibration are annual maintenance calls on the same custom driveway gates.
- Weld cracks from freeze-thaw cycles. Ornate iron gates built before thermal expansion was a design consideration crack at the weld joints after hard freezes. February 2021 did a number on older gates around Highland Park, and the cracks only widen with each passing season.
- Obsolete control boards on 1990s operators. A lot of these legacy units outlived their own parts supply. When the board fails, there’s often no replacement available. The real question is whether the gate can be retrofitted with a modern operator that meets UL 325 entrapment protection, and the answer is usually yes.
- Gates that drag on the driveway by August. Late summer in Highland Park brings dry clay, which pulls posts inward. Swing gate leaves start dragging on the apron or failing to latch. It’s not a mechanical failure. It’s the ground moving under the gate.
Pricing for Gate Installation in Highland Park, TX
A standard swing gate install in Highland Park typically runs $1,800 to $4,200, depending on gate material, width, and whether we’re setting new posts or working with existing ones. Double gate installations run higher, usually $3,500 to $7,500, because both leaves, both operators, and the center alignment all have to be right. A sliding gate on a new concrete run is $4,000 to $8,500. Pedestrian gates fall between $800 and $2,200. Security gate packages with access control and video integration start around $5,500 and go up from there. Every quote includes the price for the full job, in writing, agreed before a single bolt is turned. Call (936) 277-6521 for a free estimate on your Highland Park gate.
We Also Serve Cities Near Highland Park
Our crews work across Highland Park and the surrounding communities every week. From Dallas to Balch Springs, Mesquite, and Lakewood, we bring the same ironwork experience and 90-Day Done Right Promise to every driveway. If your gate is dragging, sagging, or stuck, call us. We’ll be there when we say.
Serving Highland Park, TX - Our Local Coverage Area
We’re based in the Highland Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Highland Park
Because the Blackland Prairie clay under your posts is the problem, not the gate. By late summer, Highland Park’s clay soil has dried and contracted, pulling hinge posts inward by an inch or more. That inward lean drops the gate leaf onto the driveway. The fix is a post realignment and, in many cases, a deeper footing so the post stops moving with every wet-dry cycle. Call (936) 277-6521 and we’ll assess your posts before the next cycle starts.
Yes, in almost every case a legacy operator on a Highland Park gate can be replaced with a modern unit that includes UL 325 entrapment protection, monitored photoeyes, and current limit controls. The gate itself usually stays. We match the new operator’s arm geometry to the existing gate and posts, then reprogram travel limits and safety edges. The result is a gate that closes like it did when it was first hung. We’re trained on LiftMaster, FAAC, BFT, and Linear retrofits, among others.
The February 2021 freeze stressed the steel in ways it wasn’t designed for. Highland Park’s older ornamental gates were fabricated without thermal expansion gaps. When the temperature dropped hard and fast, the iron contracted and the weld joints became the failure point. It’s a visible crack now, but it was always a design limitation. We can repair the welds and, where it makes sense, add expansion relief so the next hard freeze doesn’t open the same crack again.
Yes. Highland Park gates from the 1920s through the 1960s were typically custom fabricated, and that ironwork pattern is part of the home’s character. We don’t replace a damaged scroll or picket with a generic piece. We match the section’s profile, thickness, and finish, then weld it in and blend the paint or powder coat. The repaired section should be indistinguishable from the original metal. That’s the standard Victor Salinas holds every crew to.
Once a year, and late summer is the most important time in Highland Park. That’s when the clay has contracted hardest and post movement is easiest to see. We check plumb, hinge wear, latch alignment, and operator travel on every annual visit. Our $89 Seasonal Tune-Up covers the common adjustments that keep a gate from turning into a bigger job later. Call (936) 277-6521 and we’ll put you on the schedule.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Highland Park, TX with steel, weld, and automation work done right for over four decades.