Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Dallas
A new driveway gate in Dallas typically runs $2,400 to $7,800 depending on width, material, and operator. Most single-swing installations on a standard 12-foot driveway land between $3,200 and $4,600. We’re the dedicated gate team Dallas homeowners call when they want the job done once and guaranteed in writing. Call (936) 277-6521 and a live person answers, day or night.
Dallas is different from most markets. The Blackland Prairie clay under our feet swells and shrinks all year, and it punishes shallow post work. We’ve been correcting other installers’ mistakes for over 42 years, and we build every gate in Dallas with that soil in mind from the first day.
Why Ironworks Gate Co. Is Dallas’s Preferred Gate Installation Company
We’re a gate-only company. Not a fencing outfit that also hangs a gate, not a general contractor who subs it out. Our crews weld, set posts, and wire automation every week in Dallas neighborhoods from Preston Hollow to Lake Highlands to East Dallas. Victor Salinas leads the team, and the same standard applies to the first job of the week and the last: krafted right, every time, your home first, standing behind it.
Dallas homeowners tend to keep their houses for decades, and we treat every install like we’ll be driving past it for the next twenty years. We schedule a written price before any work starts, show up in a marked truck with background-checked uniformed technicians, and back every completed job with our written 90-Day Done Right Promise. If it’s not right, we come back and make it right. No paperwork, no arguing.
We’re trained and equipped on nine gate-automation brands including LiftMaster, FAAC, and Elite, so whatever is on your driveway, we can install, wire, and calibrate it correctly on the first visit.
Our Gate Installation Services in Dallas
Driveway Gate Installation
Dallas driveways run long, especially on the acreage properties north of the city and the established lots in Preston Hollow. We build driveway gates sized to your entrance and your traffic, from a single 10-foot swing gate on a city lot to a 24-foot rolling slide gate on a rural easement. Every install starts with post footings dug below the clay active zone so the gate stays plumb through Dallas’s wet-dry seasons.
Pedestrian Gate Installation
We hang pedestrian gates off driveways, pool enclosures, and side yards throughout Dallas. Older homes in Oak Cliff and East Dallas especially have aging wood or tubular steel pedestrian gates on posts that years of clay movement have pushed out of square. We set new posts deep, weld or bolt the gate to fit, and make sure the latch closes true the day we leave and every day after.
Sliding Gate Installation
A sliding gate is the right answer for Dallas properties where the driveway slopes toward the street or where a swing gate would block parking. We install cantilever and track slide gates with operators from LiftMaster, FAAC, and BFT. On long gravel driveways around Lake Highlands, a slide gate also handles wide openings without the clearance a double swing gate needs.
Swing Gate Installation
Single and double swing gates remain the most common choice in Dallas. We fabricate and install ornamental iron, aluminum, and steel swing gates with the hinge posts set in oversized concrete piers and rebar to counter Blackland clay heave. On double gates, we align the leaves, set the center drop rod, and calibrate the operator travel so the gate opens and closes without binding.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Dallas
Ironworks Gate Co. installs and services gate automation from nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Dallas customers we keep common control boards, limit switches, and solar panel assemblies on our trucks so most installations finish in a single visit. If your existing operator is from a brand you’ve had trouble getting parts for locally, we can usually source what’s needed within days and install it correctly.
Common Gate Installation Problems We See in Dallas Homes
- Post heave from Blackland Prairie clay. Dallas’s expansive clay shrinks during July and August droughts, which tilts hinge posts a few degrees. A gate that closed perfectly in May starts dragging on the latch side by August because the post leaned, not because the hardware failed.
- Operators sized for the wrong gate weight. We regularly replace openers installed by generalists who bolted a lightweight residential operator onto a heavy wrought-iron double gate in North Dallas. The motor burns out within two years, and the homeowner pays twice.
- Solar systems undersized for Dallas winters. Solar gate openers that work fine through a Dallas summer stall during the overcast stretches between December and February. We size solar panels and battery banks for the shortest daylight days of the year, not the longest.
- No entrapment protection on wide gates. Driveway gates in Texas must meet UL 325 entrapment protection standards. We see unpermitted openers without photocells or reverse loops all over Dallas, and they’re dangerous to children, pets, and vehicles. Every operator we install includes proper safety edges or photocells.
Pricing for Gate Installation in Dallas, TX
A typical single swing driveway gate in Dallas runs $2,400 to $4,600 installed, including the operator, posts, and hardware. Double swing gates on wider entrances typically run $5,000 to $9,000 depending on material and automation. A pedestrian gate on a new steel frame runs $900 to $2,200. Solar operators add $500 to $1,400 over an AC-powered unit, and we recommend them for Dallas gate locations without mains power at the entrance.
What moves the price most in Dallas is post depth and footing size. Setting posts deep enough to survive the clay shrink-swell cycle costs more up front, but it prevents the $800 to $1,500 misalignment repairs that shallow footings invite every few years. We give you a written price before any work begins, and that price is what you pay. Estimates are free. Call (936) 277-6521 to schedule a measure.
We Also Serve Cities Near Dallas
Our Gate Installation team works throughout Dallas and the surrounding metro. We regularly schedule installation work in Irving, Balch Springs, Mesquite, and Addison, with crews dispatched from our Dallas-Fort Worth office. If you’re in one of those cities and need a gate built or replaced, the same crew and the same written guarantee apply. See our Gate Installation in Dallas page for full local details.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Dallas
For a standard driveway gate in Dallas, we set hinge posts at least 36 to 42 inches deep, and for wide or heavy gates on expansive clay we go 48 inches with oversized concrete piers and rebar. The active zone of Blackland Prairie clay in Dallas runs roughly 24 to 30 inches deep, so any footing shallower than that moves with the soil. A post set 18 inches deep in Preston Hollow will lean within two seasons. Call (936) 277-6521 for an exact assessment of your soil and gate size.
Yes, and we install solar gate openers regularly on Dallas acreage properties where running mains power to the gate would cost thousands. The key is sizing the panel and battery bank for Dallas’s shortest winter days and the specific gate weight. On a long gravel driveway off Preston Road near Lake Highlands, our crew installed a 20-foot double swing gate with a LiftMaster operator running on solar because the property had no power at the entrance. We sank the hinge posts into 4-foot footings with rebar to counter clay heave and set the limit switches with extra tolerance for seasonal post movement. That gate has not bound once since.
In Dallas, that is usually the Blackland Prairie clay drying out and shrinking, which tilts the hinge post a few degrees and throws off the operator’s limit-switch calibration. The gate physically cannot travel far enough to trigger the closed position because the post has moved. It resets partially when fall rains swell the clay again, then worsens the following summer. The fix is resetting the limit switches for the current post angle, and if the post has moved more than a degree or two, re-setting the footing. Call (936) 277-6521 and we’ll diagnose it.
Yes. Automatic gate operators in Dallas and throughout Texas must meet UL 325 entrapment protection standards, which require safety devices like photocells, reverse loops, or contact edges that stop and reverse the gate if a vehicle, person, or animal is in the path. Every operator we install includes proper entrapment protection. If you have an existing gate without it, that is a safety liability and a code issue. Call (936) 277-6521 and we will bring it up to standard.
For wide Dallas acreage entrances with livestock or equipment traffic, we recommend a double swing gate with heavy-duty hinges and a high-torque operator, or a cantilever slide gate if the opening exceeds 24 feet or the ground is irregular. Slide gates are better for frequent vehicle traffic because they do not swing into the driveway. For cattle access specifically, pair the gate with a loop detector or manual hold-open feature so it does not close on livestock. Every install includes proper entrapment protection. Call (936) 277-6521 for a free site measure and written quote.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Dallas since 1984.
When you’re ready for a gate that stays plumb through Dallas summers and winters, call (936) 277-6521. A live person answers, 24 hours a day, seven days a week. We’ll schedule a free measure, give you a written price before any work starts, and stand behind the finished job with our 90-Day Done Right Promise. Done right, and backed in writing.