Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Dallas, TX
When a driveway gate stops closing in Dallas, it’s rarely just a hinge problem. The Blackland Prairie clay under your posts has been expanding and contracting through every wet spring and scorching summer since the gate was installed, and sooner or later that movement wins. We’re Ironworks Gate Co., and we’ve spent 42 years fixing gates across North Texas the way a blacksmith fixes an iron fence: find the root cause, correct it properly, and stand behind the work in writing. If your gate is stuck, sagging, or refusing to open this morning, call (936) 277-6521. A live person answers, day or night.
Key takeaways:
- Most Dallas gate failures trace back to soil movement, not the gate itself
- We service nine opener brands: BFT, Linear, Viking, Ghost Controls, and five others
- Every repair is quoted before work begins, and backed by our 90-Day Done Right Promise
- A live person answers every call, 24 hours a day, 7 days a week
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Dallas Homeowners Choose Ironworks Gate Co.
Dallas homeowners have long memories for contractors who showed up late, quoted one price and billed another, or patched a gate that failed again before the grass grew back. We built Ironworks Gate Co. for people who are done with that. Founded in 1984, we’re a gate-only company, which means our technicians don’t split their week between fences, decks, and gates. Gates are the whole job. Victor Salinas leads a crew of background-checked, uniformed technicians who work the way they’d work on their own mother’s driveway: careful, clean, and honest about what needs fixing today versus what can wait.
Homeowners in Preston Hollow and Lake Highlands call us because their automated ornamental iron gates demand a level of craft that generalist handymen simply don’t carry. Whether it’s a sagging swing gate on Royal Lane or a slide operator pulling too many amps near White Rock Lake, we diagnose the full system, explain the fix in plain English, and hand you a written price before a single bolt is turned. Most jobs are completed in a single visit.
Gate Repair Services We Offer in Dallas
Gate Repair
A leaning post in the Blackland clay will bind your gate, strain your opener, and eventually snap a hinge or tear a weld. We re-set posts, re-weld cracked frames, replace worn hinges and rollers, and true the gate leaf so it swings or slides freely again. Done right, and backed in writing.
Learn more about our Gate Repair in Dallas.
Gate Installation
New driveway gates in Dallas must be engineered for the soil they’re planted in. We install ornamental iron, aluminum, steel, and wood gates with posts set below the active clay line so they don’t heave in the first wet season. Every installation begins with a free measure and a written quote.
Learn more about our Gate Installation in Dallas.
Gate Motor & Opener
Your opener’s control board, motor bearings, and wiring insulation are all fighting a losing battle against Dallas heat and storm-season electrical surges. We service nine automation brands including BFT, Linear, Viking, and Ghost Controls, so the correct fix happens on the first visit, whatever is mounted on your post.
Learn more about our Gate Motor & Opener in Dallas.
Gate Access Control
Keypads, intercoms, card readers, vehicle loop detectors, and telephone entry systems all need proper grounding and weather protection to survive a Dallas summer. We install and repair access control on existing and new gates, wired and wireless.
Gate Parts & Welding
Wrought iron fatigues, aluminum oxidizes, and Texas storms take their toll. Our welders fabricate and replace gate frames, pickets, hinges, latch plates, and decorative finials, matching your existing metalwork as closely as the original shop would have done.
Neighborhoods We Serve in Dallas
We dispatch locally from our Dallas-Fort Worth office, so response times across most of the city run within a same-day window for repair calls. Here are a few of the neighborhoods we work in regularly:
- Preston Hollow
- Lake Highlands
- Oak Cliff
- East Dallas
- Far North Dallas
Your street doesn’t need to be on this list. If you’re in Dallas and your gate is giving you trouble, call us.
Why Dallas’s Climate & Housing Affect Gate Repair
Dallas sits on an expanse of Blackland Prairie clay that swells dramatically after rain and shrinks during the city’s intense summer droughts. That seasonal heave-and-shrink cycle pushes gate posts out of plumb on an annual basis, not just once at installation. The result is a gate that binds against the latch, drags on the driveway, or trips the opener’s limit switch because the post moved a few degrees since April. Any repair that ignores post movement will fail again within months. That’s why our crews spend more time with a level and a post-hole digger than any Dallas homeowner expects. The gate hardware is usually not the problem. The soil underneath it is.
The February 2021 winter storm Uri was a wake-up call for thousands of Dallas homeowners with automated gates. Actuator fluid lines froze and cracked, backup batteries died, and control boards cooked themselves when power returned. That single week destroyed more gate automation in Dallas than the previous decade of normal wear. Since then, we’ve replaced and upgraded countless systems with cold-rated seals and surge-protected controls, tailored to the reality that Dallas now sees both hundred-degree summers and hard freezes in the same year. Victor Salinas and the team have seen every failure mode this city can throw at a gate, and we fix each one the same way: right, once, and guaranteed.
Dallas technicians also know to expect a surge of “gate won’t close all the way” calls every July and August. The Blackland clay has dried and contracted enough to tilt posts a few degrees, throwing off the limit-switch calibration on automated operators. It’s a purely soil-driven failure that sometimes eases when fall rains return, then worsens again the following summer. The permanent fix is a deeper post reset, not another twist of the calibration screw.
Pricing for Gate Repair in Dallas
Every gate repair in Dallas starts with a clear, written quote before any work begins, so the price you see is the price you pay. Here’s what you can expect:
- Service call and diagnosis: $89, credited toward the repair when you proceed
- Hinge or roller replacement: $180-$340 depending on gate weight and steel type
- Post re-setting (single post): $350-$700, including concrete and labor
- Opener control board replacement: $280-$620 by brand, including programming
- Weld repair, cracked frame or picket: $150-$450 by location and access
We honor standing offers: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% discount for seniors and veterans. Call (936) 277-6521 for an exact quote; estimates are always free.
Service Area - Cities Near Dallas
Ironworks Gate Co. serves the entire Dallas metro area. If you’re nearby, we also provide gate repair in Irving, Balch Springs, Mesquite, and Addison.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Dallas
Most Dallas gate repairs run between $180 and $700, with the figure depending on whether the post needs re-setting, the opener has failed, or the frame needs welding. A service call with diagnosis is $89, credited toward the repair. Call (936) 277-6521 for a free, exact quote before any work starts.
In most cases, yes. We dispatch locally from our Dallas-Fort Worth office and maintain same-day availability for repair calls across Dallas. A live person answers 24/7, so you’ll know right away when a technician can be on your driveway.
The Blackland Prairie clay under your gate posts shrinks during Dallas’s hot, dry summers and swells after rain. This seasonal movement tilts posts a few degrees each year, throwing off your gate’s alignment and opener calibration. The lasting fix is re-setting the posts below the active clay line, not just adjusting the gate leaf.
We’re trained and equipped on nine gate-automation brands including BFT, Linear, Viking, Ghost Controls, LiftMaster, FAAC, DoorKing, Elite, and Mighty Mule. Whatever is mounted on your post, we can likely fix it on the first visit.
Every completed job is protected by our 90-Day Done Right Promise: a written guarantee with no paperwork, no arguing, and no exceptions. If it’s not right, we come back and make it right. Call (936) 277-6521 to schedule.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Dallas since 1984.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Dallas Customers Say
"Used them at two properties now. Both times they diagnosed it on the first visit instead of guessing and coming back."
- Rohan Shah"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and put a surge protector on the line so hopefully it does not happen again."
- Layla Haddad"Our slide gate had been dragging for months and getting worse. The chain was stretched and a guide roller had seized. Both replaced, and he reset the limits so it stops properly at each end now."
- Veronica Ramirez