Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Farmers Branch
Gate parts and welding work in Farmers Branch comes down to one thing: doing the job correctly the first time. Hinge posts set in our clay-heavy soil shift, rails crack from years of opening and closing, and latches stop lining up. Most repair calls we take in Farmers Branch are for exactly those problems. A post that has moved, a hinge that has worn through, a weld that was never strong enough to begin with. Our crews know the difference between a gate that needs a fifteen-minute adjustment and one that needs a new post set in concrete. Call us at (936) 277-6521 and we will tell you straight what you are looking at.
Why Ironworks Gate Co. Is Farmers Branch’s Preferred Gate Parts & Welding Company
We have been welding and repairing gates for over 42 years, and the work we do in Farmers Branch is the same work we would do on our own homes. That is not a slogan. It is how Victor Salinas runs this company, and how every technician who shows up at your gate is trained to think. Homeowners here tend to keep their homes for decades. They remember the contractor who cut a corner, and they remember the one who did not. We aim to be the second kind.
Farmers Branch is nearly built out. Most of the housing stock dates from the 1950s through the 1970s, which means the original gate posts are often older than the families now living behind them. That is useful knowledge for us. It means we know what we will find before we dig: clay soil, undersized post footings, and rust hidden inside a hinge barrel. And those findings are why our customers stay with us. We quote the full job before we start, do the work in one visit when it can be done, and stand behind every weld and every hinge replacement with our written 90-Day Done Right Promise. No paperwork gymnastics if something is not right. We come back and make it right.
Our Gate Parts & Welding Services in Farmers Branch
Our Gate Parts & Welding team handles the kind of failures that are common on older Farmers Branch properties: shifted posts, worn hinges, cracked rails, and sagging gates that scrape along the driveway. We do not just swap a part and disappear. We look at why the part failed.
Hinge Replacement
The hottest and the coldest weeks of a Texas year both punish gate hinges. On older Farmers Branch gates, the original hinges are often undersized for the weight of the leaf. We carry heavy-gauge replacement hinges and weld them on in the shop and on site. When a hinge has wallowed out its mounting holes, we cut the old bracket off, grind the post clean, and weld a new bracket in place. Then we check the gate leaf for sag. Farmers Branch gates tend to sag at the latch corner, so we set the new hinge line a touch high to allow for that.
Post Replacement
This is the repair we do most often in Farmers Branch. Gate posts set in clay-heavy soil without proper compaction lean inward. Sometimes within two years of installation, sometimes after twenty. A leaning post pulls the hinge line down, the gate drags on the concrete, and the latch misses the strike. We remove the old post, set a new schedule 40 steel post in concrete, and brace it while the footing cures. If the old post is still sound, we can sometimes sleeve it and weld a gusset to correct the lean without a full dig. Either way, you get a post that stays plumb through rain and drought cycles.
Rail Repair
Gate rails crack because they flex thousands of times a year. On swing gates, the crack usually starts at the hinge stile. On slide gates, it appears at the cantilever transition. You can keep painting over a hairline crack, but the metal is telling you it is done. We cut out the cracked section and weld in a new steel rail, then reinforce the joint with a plate on the inside face. If the old gate panel is worth saving, we save it. If the rail failure opened the gate frame too far, we tell you honestly and move to the next conversation: full panel replacement.
Custom Welding
Some Farmers Branch gates were hand-built decades ago and replacements for their parts are not on any shelf. That is where our welding bench earns its keep. We fabricate gate rollers, latch strikes, drop rods, receiver brackets, and custom hinge plates. If you need an extension welded onto a too-short gate leaf, or a steel panel cut down to fit a new opening, we do that too. Forty-two years of welding means we can match the original metal and not leave a visible patch that looks like an afterthought. Victor Salinas still checks the shop welding himself. The standard does not slip.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Farmers Branch
We service and install gate operators from LiftMaster, Elite, FAAC, and Mighty Mule, among others. It matters because a welding repair almost always touches the operator opening and closing the gate. If we weld a rail, we re-set the operator limits. If we replace a hinge post, we re-adjust the close travel so the latch strikes true. We keep the most common replacement parts for these brands on our trucks, including control boards, limit switches, and battery leads. When a Farmers Branch customer calls at 7 a.m. with a dead opener after a weld repair elsewhere, we are ready that morning.
Common Gate Parts & Welding Problems We See in Farmers Branch Homes
- Hinge posts leaning in from clay movement. The soil in Farmers Branch expands when wet and contracts when dry. Posts set in uncompacted clay lean inward over just a few seasons. The gate leaf drags, the latch misses, and eventually the operator burns out trying to force the close.
- Slide gates skipping teeth on the rack. On older concrete driveways in Farmers Branch, the track was sometimes set level instead of pitched. Water pools, the rollers wear unevenly, and the pinion skips under load. We realign the rack, replace the pinion gear, and re-pitch the track where possible.
- Solar operators starving for sun. Tree-lined yards are beautiful, but they are hard on solar gate openers. In winter, a shaded panel near Rawhide Creek or along the greenbelt never charges enough. We can relocate the panel, add a second panel, or switch the system to a hardwired AC power supply.
- Weld cracks on the hinge stile. Swing gates in Farmers Branch carry a lot of weight on a small hinge area. Over years of use, the stile cracks at the top hinge weld. We grind it out, weld it full-penetration, and plate the inside corner. The repair lasts because we address the gate sag that caused the crack in the first place.
Pricing for Gate Parts & Welding in Farmers Branch, TX
Here are the numbers you can expect in the Farmers Branch market. Hinge replacement on a standard residential swing gate runs $280 to $520 depending on hinge size and the condition of the post. Post replacement with concrete set and bracing runs $650 to $1,300 per post, plus any fence work. Rail repair runs $180 to $520 depending on crack length and whether we need to plate the joint. Custom welding is quoted by the job; a small bracket fabrication runs $60 to $160, while a full post sleeve and gusset job runs $350 to $650. Sag correction usually falls between $220 and $480. Every quote is fixed before we touch the gate. No surprise line items. No hand-scrawled add-ons after the job is done. You will also see the $50-off-any-repair-over-$250 offer applied to your quotation when it applies, and the 5% senior and veteran discount every time.
Call (936) 277-6521 for a free, written estimate. We quote the job before any work begins, and the price we quote is the price you pay.
We Also Serve Cities Near Farmers Branch
From our Dallas-Fort Worth office, our crews roll out daily to the surrounding cities: Highland Park, Dallas, Balch Springs, and Mesquite. So when a neighbor in Highland Park asks who repaired your gate, you already have an answer. For anyone searching Gate Parts & Welding in Farmers Branch, we cover every neighborhood in the city, from the older streets off Valley View Lane to the newer builds near the Brookhaven area.
Serving Farmers Branch, TX - Our Local Coverage Area
We’re based in the Farmers Branch area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Farmers Branch
Here are the questions we hear most from Farmers Branch homeowners. We answer them plainly, the way we would on the phone.
The hinges are usually not the real problem. On almost every dragging swing gate in Farmers Branch, the post itself has leaned inward. The clay soil expands and contracts with the seasons, and an old or undersized footing lets the post move. Adjusting the hinge brackets just moves the drag point around. The fix is to straighten the post or set a new one. That means digging, bracing, and welding new hinge plates. We do that job here every week. Call (936) 277-6521 and we will come look at the footing before you spend another hour with a wrench. The quote is free.
Yes, when the panel is structurally sound. We cut out the cracked or rotted rail, weld in a new steel rail of the same profile, clean up the weld, and paint it to match. If the gate is severely rusted or the top rail has also failed, we will tell you that replacing the panel makes more financial sense. But we will never push you toward a whole new gate when a $300 weld repair would keep your old one running another ten years. That is not how we operate in Farmers Branch.
Probably not, not reliably. A shaded solar panel in Farmers Branch does not get enough direct winter sunlight to keep the battery above the voltage threshold. The gate will fail just when you need it most, and the battery will die a little sooner each time. We solve this by relocating the panel to a sunlit position, adding a second panel, or running a low-voltage AC line to the opener. Call us at (936) 277-6521 and we will check the sun exposure on your lot before you spend money on a solar kit that will disappoint you.
You can, but the new pinion will skip on the same worn rack. We replace the pinion gear, then we inspect the rack. If the rack teeth are worn, we replace the rack section too. Then we adjust the track alignment and the drive chain tension. Doing it all at once in one visit means you are not calling us back in three months with the same skipping. Most slide gate rack and pinion repairs in Farmers Branch run between $420 and $850 including the parts and the realignment. The exact figure is quoted before we start.
After any welding work on the gate frame, we always re-test the safety photocells and the close-force setting. Welding heat can warp a mounting bracket slightly, and a cell that is an inch out of alignment will fail to stop the gate. We block the beam and run a close cycle on every job. If the cell dose not stop the gate, we realign or replace it before we leave. That test is part of every repair we do in Farmers Branch. It is not an add-on. It is the standard.
Call Ironworks Gate Co. for Gate Parts & Welding in Farmers Branch
If your gate is sagging, skipping, rusting through a hinge, or the post has started to lean, we would rather you call us before it gets worse. Tell us what you are seeing. We will tell you honestly whether it needs a repair today or can wait a season. Then we quote the work in writing, complete it correctly, and stand behind every weld and every part with our 90-Day Done Right Promise. A live person answers our phone 24 hours a day, seven days a week. That is not a customer service line, that is us. Call (936) 277-6521 and get your gate working like it should. No pressure, no surprises, just the job done right.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Farmers Branch and the surrounding Dallas-Fort Worth area.