Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterWhy Highland Park Homeowners Choose Ghost Controls Gate Repair
Ghost Controls gate opener repair in Highland Park is work we handle every week, on every series the company has put on a Texas driveway. We are an independent Ghost Controls service provider, not a factory-authorized shop, which means we repair what is actually broken instead of routing you through a warranty call center. From the AXDP swing-arm units on the older estates off Preston Road to the DSL sliding openers on the wider lots near Lakeside Drive, we stock Ghost Controls-specific parts on the van and complete most repairs in one visit. Call (936) 277-6521 any time, day or night, and a live person picks up.
Highland Park presents a particular set of conditions for Ghost Controls equipment. The Blackland Prairie clay under these streets swells in spring and contracts hard by August, shifting gate posts and pulling operator mounts out of alignment. The humid heat accelerates seal failure on the arm assemblies, and the February 2021 freeze left hairline cracks in more operator covers than most homeowners realize. We fix the operator, then we fix the conditions that killed it, so the gate keeps cycling through next summer.
Why Trust Ironworks Gate Co. for Your Ghost Controls Gate Repair?
Victor Salinas, our owner and lead gate technician, has been working on Dallas gate automation for well over two decades. He trained in welding and electrical systems at Eastfield College before spending years alongside fabricators and gate mechanics, and he grew up near Turtle Creek, where the ironwork on the older Highland Park estates first caught his eye. Ghost Controls units are not a sideline for us. They are one of nine automation brands we service on a regular basis, and our technicians know the quirks of the AXDP’s internal seals and the AXP’s transformer behavior the way a mechanic knows a particular engine.
We use genuine Ghost Controls OEM parts for every electronic component: control boards, receivers, motors, and sensors. Aftermarket parts have their place, but not inside a control box. When we complete a Ghost Controls repair in Highland Park, it carries our written 90-Day Done Right Promise. If it is not right, we come back and make it right. No paperwork, no argument. That is the Keystone Standard on every job we do, and it applies whether we are replacing a limit switch or rebuilding a gate that has dragged on its apron since spring.
Common Ghost Controls Gate Repair Problems We Fix in Highland Park
- Control board corrosion on AXDP and FP series swing openers. The internal seals on these arms fail slowly, often after two or three Highland Park summers. Humidity works its way in, condensation forms inside the housing, and the board corrodes until the gate beeps but will not move. We replace the board with a genuine Ghost Controls part and reseal the housing properly, which the factory seal often was not enough to do here.
- Motor burnout on DSL series sliding openers. When a sliding gate gets forced open by hand or clipped by a delivery truck, the rack and pinion jump out of alignment. The motor then works against a misaligned gear track until it burns out. We see this on the long driveway gates in Highland Park where the clay shifts the track slightly every season and the misalignment compounds.
- Intermittent operation from failing AXP series AC transformers. The transformer feeds the control board, and when it starts to go, the gate works sometimes and not others. The board resets mid-cycle. The remote works one hour and not the next. Homeowners often replace remotes and keypads before the real cause is found. We test the transformer first on any AXP with intermittent symptoms.
- Broken infrared beam from bent photo-eye brackets. Dallas heat softens the metal brackets that hold the photo-eye sensors, and a stiff wind or a bump from a mower bends them just enough to break the beam. The gate refuses to close, or reverses immediately. It is a five-minute fix with the right bracket, and we keep them on the van.
- Worn linear arm gears on AXDV swing openers. The AXDV’s arm carries the full weight of a heavy wrought-iron gate leaf. On Highland Park’s custom gates, which run heavier than standard residential hardware, the internal gears wear faster than the manufacturer’s average. We replace the gear set and adjust the arm so the gate closes like the day it was hung.
Ghost Controls Parts & Our Repair-vs-Replace Approach
Genuine Ghost Controls OEM parts go into every electronic repair we do. Control boards, receivers, transformers, and motors all come from Ghost Controls, because those components are calibrated to the system’s operating logic and a knockoff board is a false economy. For non-critical hardware like hinge brackets, mounting plates, and photo-eye housings, we offer quality aftermarket options that hold up in the Texas heat and save real money. We tell you which parts matter and which ones don’t.
The repair-versus-replace decision is straightforward. If the operator is under 12 years old and the repair is under 60% of a new unit’s cost, we repair it. If the unit is older or the damage is extensive, we say so plainly and give you a written price either way before any work begins. That price is what you pay. No surprises on the bill. Call (936) 277-6521 for an honest assessment of your Ghost Controls opener.
Our Ghost Controls Service Process - Step by Step
- 1
Diagnosis. We test the Ghost Controls control board, transformer, motor, and sensors in that order, because that is the order failure travels through these systems. We tell you exactly what failed and why it happened. No guesswork, no runaround.
- 2
Repair or replacement, quoted up front. You get the price before a single bolt is turned. If we recommend replacement, we explain the math. If repair makes sense, we proceed the same visit with the Ghost Controls parts we carry.
- 3
Installation and calibration. We install the genuine Ghost Controls part, then set the force limits, travel limits, and photo-eye alignment to the gate’s exact weight and swing arc. A heavy Highland Park iron gate needs different settings than a standard residential panel, and we calibrate accordingly.
- 4
Testing and the 90-Day Done Right Promise. We cycle the gate a full ten times with the remote, keypad, and obstruction test. Then your job is covered in writing for 90 days. If it is not right, we return and make it right.
Ghost Controls Products We Service & Install in Highland Park
We service and install the full Ghost Controls residential lineup: the AXDP and AXDV automatic swing gate opener series, the AXP series, the DSL sliding gate openers, the FP series swing openers, and the ABBT battery backup systems. On the van we carry Ghost Controls control boards, receivers, photo-eyes, transformers, limit switches, and remote transmitters, so most single-visit repairs in Highland Park are completed that day. Battery backup installation on an existing Ghost Controls opener is work we do regularly, and we size the unit to your gate’s specific draw rather than selling a one-size-fits-all box.
We Also Service These Brands
Ghost Controls is one of nine automation brands we service, and that breadth matters when a Highland Park driveway has a mix of equipment. We also repair LiftMaster, Mighty Mule, and DoorKing openers, along with FAAC, BFT, Linear, Viking, and Elite. If your estate has more than one opener or a legacy unit on a secondary gate, one call covers all of it.
FAQs - Ghost Controls Gate Repair Service in Highland Park
The beep means the control board is receiving a signal but the motor is not engaging, which on Ghost Controls units almost always points to a dead capacitor, a failed transformer on AXP models, or a corroded board connection on AXDP or FP arms. We test each of those in order and replace the failed component with a genuine Ghost Controls part. Call (936) 277-6521 and we will diagnose it on site.
Yes, in most cases the linear arm itself is repairable. If the gate leaf has sagged from post movement, which is common in Highland Park as the clay shrinks through summer, the arm’s internal gears take the strain and wear out. We replace the gear set, then realign the gate and posts so the repaired arm is not fighting the same load again. For custom wrought-iron gates, we also handle the metalwork side, straightening and welding the leaf if needed.
The keypad and remote run through the same receiver on Ghost Controls boards, so the problem is usually in the keypad wiring, the keypad’s own transmitter, or a keypad code that has been wiped from the board’s memory. We test the keypad with a fresh code first, then check the wiring run if it is a hardwired unit. It is rarely the control board itself.
Grinding on a DSL series sliding opener generally means the rack and pinion have come out of alignment, often after the gate post shifted or the gate was forced open. The motor then drives the pinion against the rack at an angle. Left alone, that grinding becomes a burned-out motor. We realign the rack, set the pinion clearance, and replace the motor only if it has already taken damage.
We do. The ABBT battery backup installs directly onto an existing Ghost Controls opener and keeps the gate operational through power outages, which matter in Highland Park when a summer storm or freeze event cuts power for hours. We install the correct ABBT unit for your opener series and test the switchover before we leave. We never promise same-day service on installations; we schedule a time, arrive when we say, and complete the work in one visit.
Ghost Controls repair pricing in Highland Park runs from about $140 for a photo-eye bracket replacement or limit switch adjustment up to $450 to $700 for a control board or motor replacement with a genuine OEM part. The majority of our Ghost Controls repairs fall between $180 and $380, and you will have the exact price in writing before any work starts. Call (936) 277-6521 for a free estimate on your specific opener.
Book Your Ghost Controls Service in Highland Park, TX
Call (936) 277-6521 and a live person answers, 24 hours a day, seven days a week. We will schedule your Ghost Controls repair at a time that works, arrive when we say, and fix it right the first time. We fix it right the first time, and we tell you exactly why it failed - no guesswork, no runaround. Free estimates. Written pricing before work begins. The 90-Day Done Right Promise on every job.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Highland Park gate repair since 1984.