Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Lakewood, TX
Welcome to Ironworks Gate Co. If your gate is sagging, sticking, or will not open at all, here is the short answer: we repair gates across Lakewood, TX, and we can usually have a technician at your driveway within the same day. Most repairs are completed in a single visit, with the price settled before any work begins. When you call (936) 277-6521, a live person answers, 24 hours a day, seven days a week. No voicemail trees, no waiting until Monday.
We do one thing: gates. Driveway gates, estate gates, garden gates, and the motors, hinges, keypads, and welding that keep them working. Our training covers nine opener brands, including BFT, Linear, and Viking. But the real difference in Lakewood is that we know your neighborhood. We know Swiss Avenue, we know the old brick columns on Lakewood Boulevard, and we know what the soil under Lakewood does to a gate post. That is not something a general handyman picks up from a manual.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Lakewood Homeowners Choose Ironworks Gate Co.
Lakewood is not a neighborhood where homeowners shop for the cheapest fix. The homes here were built to last, and the people who live in them have watched plenty of contractors overpromise and disappear. Our reputation in Lakewood is built the slow way: show up when we say we will, find the actual problem, fix it properly, and stand behind the work in writing.
Two areas we visit often are the historic blocks around Swiss Avenue and the bungalow streets east of Abrams Road toward Vickery Meadows. In both, the gates are older, the posts are set in restless clay soil, and the hardware has seen decades of Texas weather. Our technicians are background-checked and uniformed, and they work the way they would at their own mother’s house: shoes covered, area tidied, gate tested before we leave. Every job carries our written 90-Day Done Right Promise. If it is not right, we come back and make it right. No arguing, no paperwork, no exceptions.
Gate Repair Services We Offer in Lakewood
Gate Repair
A gate that drags on the ground or will not latch usually means bent hinges, a shifted post, or a frame that has torqued out of square. We diagnose the cause, not just the symptom, then repair it with the right metal and hardware for the job. Learn more about our Gate Repair in Lakewood.
Gate Installation
Whether it is a replacement for a rusted-out gate on a 1930s Tudor or a new driveway gate for a home off Gaston Avenue, we measure, fabricate, and install gates that fit the opening and the house. We do not show up with a one-size-fits-all panel and hope it works. Learn more about our Gate Installation in Lakewood.
Gate Motor & Opener
When the motor hums but the gate will not move, the problem could be the board, the capacitor, the limit switch, or a bad connection. We are trained on BFT, Linear, Viking, Ghost Controls, and five other major brands, so the correct fix is made on the first visit. Learn more about our Gate Motor & Opener in Lakewood.
Gate Access Control
Keypads, intercoms, vehicle sensors, and remote systems all need to talk to the opener correctly. If the gate works when you press the button but not when the keypad is used, we trace the system end to end and repair or replace the failing part. From simple remotes to multi-home access setups, we handle it.
Gate Parts & Welding
Cracked pickets, snapped hinges, rusted-through gate frames, broken welds. Our technicians weld on-site more often than people expect, and they use the right gauge metal so the repair outlasts the original. For ornamental iron matching, we know local fabricators who replicate period profiles, which matters on the Swiss Avenue corridor.
Neighborhoods We Serve in Lakewood
Our team regularly works in every corner of Lakewood, from the estate gates near Fair Park to the courtyard gates tucked into the streets around University Crossing. Typical response for a repair call is same-day in most cases.
- Swiss Avenue Historic District - period iron gates and masonry columns
- The Cottages at Lakewood - bungalow and Tudor-era gate work
- Lakewood Heights - original cedar and wrought-iron gates
- University Crossing - newer gates and motor systems
Why Lakewood’s Climate & Housing Affect Gate Repair
Lakewood sits on Dallas Blackland Prairie clay, and that soil expands and contracts more than most homeowners realize. After a wet spring, the clay swells and pushes on gate posts. After a dry August, it shrinks and the posts lean. The result season after season: gates that bind at the latch, drag at the corner, or no longer align with the strike plate. Before we touch a hinge or a motor, we often have to re-plumb the post itself, reseat it, and then adjust the gate to the newly level position.
There is also the matter of the lake. Lakewood’s location next to White Rock Lake means consistently higher humidity than homes a few miles inland. That moisture seeps into hinge pins, gate rollers, and motor housings, causing surface rust and seized hardware faster than in drier parts of Dallas. A gate that lasted twenty years in Garland might need hinge replacement in fifteen years here. We factor that in when we choose replacement hardware: galvanized or stainless where it matters, sealed bearing hinges on heavy gates, and a protective coating schedule that actually fits the local microclimate.
Pricing for Gate Repair in Lakewood
Most gate repairs in Lakewood fall between $180 and $340 for common issues like hinge replacement, latch adjustment, or a limit switch replacement on an opener. Here is a breakdown of what homeowners typically see:
- On-site diagnostic: $65, waived if we proceed with the repair
- Hinge replacement (pair): $140-$260 depending on gate weight and material
- Post re-plumbing / re-setting: $220-$480 for a standard brick or steel post
- Opener board or motor repair: $190-$380 depending on brand and part
- Full fabrication of a replacement gate: quoted by the job after measure
Every quote is given and agreed to before the first bolt is turned. No surprises on the bill. Call for an exact price on your gate, and ask about our standing offers: $50 off any repair over $250, a free second opinion on any written estimate, and an $89 seasonal tune-up.
Service Area - Cities Near Lakewood
While Lakewood is home base for many of our customers, we also serve Highland Park, Dallas, Balch Springs, and Mesquite. Scheduling and dispatch are coordinated from our Dallas-Fort Worth office, and crews serve Lakewood locally.
Serving Lakewood, TX - Our Local Coverage Area
We’re based in the Lakewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Lakewood
Most gate repairs in Lakewood run between $180 and $340, with post re-plumbing and full gate replacements costing more depending on the size and material of the gate. We quote a fixed price before any work begins, so the number you agree to is the number you pay. Call (936) 277-6521 for an exact quote, and ask about the free second opinion on any written estimate.
Yes, in most cases we can have a technician out the same day when you call. A gate stuck open is a security issue, and a gate stuck closed is a fire access issue, so we treat these as priorities. The phone is answered by a live person at (936) 277-6521, 24 hours a day, and we will give you a straight answer on when we can arrive.
Yes, and we understand what that means. The Swiss Avenue Historic District has preservation standards that require any replacement gate or significant modification to be aesthetically compatible with the home’s period character. A big-box tubular steel panel will not pass. We work with fabricators who replicate period wrought-iron profiles, so the new gate fits the house and the district review process. Call us about your specific property.
The most common cause in Lakewood is not the hinge at all, it is the post shifting in the Blackland Prairie clay. When the post leans even a few degrees, the gate binds no matter how much oil you use. We correct the post first, then address the hinge, and the gate swings freely again. If you are in the White Rock Lake microclimate, seized hinges from humidity are a close second. We replace with sealed bearing hinges where corrosion is recurring.
Almost certainly. Our technicians are factory-trained in nine brands, including BFT, Linear, Viking, and Ghost Controls, plus LiftMaster, FAAC, DoorKing, Elite, and Mighty Mule. Whatever is on your driveway, we have likely repaired the exact model before. Tell us what the opener is doing, and we will tell you honestly whether it is worth repairing or replacing. Call (936) 277-6521 and ask.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Lakewood, TX with gate repair, installation, and automation services.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lakewood Customers Say
"Used them at two properties now. Both times they diagnosed it on the first visit instead of guessing and coming back."
- Rohan Shah"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and put a surge protector on the line so hopefully it does not happen again."
- Layla Haddad"Our slide gate had been dragging for months and getting worse. The chain was stretched and a guide roller had seized. Both replaced, and he reset the limits so it stops properly at each end now."
- Veronica Ramirez