Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.





Linear Gate Access Control in Highland Park: What to Know First
Linear gate access control in Highland Park typically includes keypad entry systems, telephone entry units, card readers, and the receivers wired into the gate operator itself. Most Linear access control repairs we perform are completed in a single visit, with the majority of parts either on the truck or available locally within a day. The honest price posture is this: we quote the full cost before any work starts, and that price doesn’t change when the job is done.
This page is for Highland Park homeowners who own a Linear system and need it working correctly. If you’re standing at a keypad that won’t take the code, or a phone entry unit that rings but won’t release the gate, call (936) 277-6521. A live person answers, 24 hours a day.
How Linear Products Fail, and How We Fix Them
Linear systems are solid workhorses, but after a decade or two in the Texas heat and Highland Park’s specific conditions, certain failures show up repeatedly. Here’s what we see most often, and what we do about it.
- Linear APeX series keypads with dead or intermittent buttons. The membrane keypads on older APeX units crack and delaminate after years of direct sun exposure. The symptom is simple: some buttons work, others don’t, or the whole pad goes dead after rain. We replace the keypad face or the full unit depending on age, using weather-sealed parts rated for outdoor Texas summers.
- Linear AM3 Plus and AE1000 telephone entry systems that ring but won’t release the gate. On Highland Park estates with long driveway runs, the relay inside the telephone entry board burns out from the constant load of cycling the gate. The unit still rings the house phone, so homeowners think the system is fine when it isn’t. We test the relay with a meter, confirm the failure, and replace the board or the relay as needed.
- MegaCode receiver boards failing to recognize remotes. Linear’s MegaCode technology is rolling-code, which is good security. But the receiver boards on some older operators develop a weak antenna connection over time, which kills range until the remote only works from ten feet away. We re-solder or replace the antenna, then verify range at the property line, not just at the keypad.
- Linear access control system dated by the Highland Park soil shift. The blackland prairie clay under Highland Park expands and contracts with moisture. Gate posts move, the gate frame torques, and the lock or magnetic contact misaligns just enough that the access control thinks the gate is still locked when it isn’t, or vice versa. We re-align the gate, the lock, and the contact, then re-test the full entry sequence.
- Linear Delta-3 and older wired keypads where moisture follows the wire into the enclosure. We regularly find corrosion inside keypad housings where the wire enters from below. The fix is replacing the corroded terminals and re-routing the entry point with a drip loop, so water can’t follow the wire into the board.
Our Linear Gate Access Control Process
Here’s how a Linear access control job goes when you call Ironworks Gate Co.
- 1
You call, a person answers. Not a voicemail tree. We ask what the system is doing or not doing, and we schedule a window that works for you.
- 2
We arrive and diagnose. Our technician checks the keypad, the receiver, the operator, and the wiring. On a Linear job, that means testing with a meter before replacing anything, because a dead keypad and a dead relay can look identical from outside.
- 3
We lay out the options and the price. If an OEM Linear part is the right call for warranty and longevity, we say so. If a quality aftermarket part does the same job for less, we tell you that too, and let you decide. The price is settled before a single bolt turns.
- 4
We do the work. Whether it’s a new keypad, a phone entry board, or a full camera intercom retrofit compatible with your Linear operator, the work is done clean, with weather-sealed connections and drip loops where they’re needed.
- 5
We test the whole sequence, not just the part. Code entry, remote trigger, phone release, open, close, stop, reverse. If the gate doesn’t behave end to end, we’re not done.
- 6
We hand you the 90-Day Done Right Promise in writing. If it’s not right, we come back and make it right. No paperwork fight, no argument.
What Linear Gate Access Control Costs in Highland Park
Linear access control repair in Highland Park generally falls into clear ranges. A keypad replacement, including the part and labor, runs $280 to $520 depending on the model and whether the wiring needs attention. Telephone entry system relay or board repair runs $340 to $680. A full telephone entry system replacement with a modern unit compatible with your Linear operator runs $900 to $1,800 installed. A complete access control retrofit adding video intercom and smart access to an existing Linear operator runs $2,200 to $4,800 depending on the scope.
What moves the price is parts availability, the age of the wiring, and whether the gate itself is out of alignment and fighting the access control. We will quote your exact job for free, before anything starts. Call (936) 277-6521 and we will come look.
Why Highland Park Homeowners Call Ironworks Gate Co. for Linear Work
We have been serving Highland Park for over 42 years, and Linear is one of the nine gate automation brands our technicians are trained and equipped to service, right alongside LiftMaster, Mighty Mule, Ghost Controls, and DoorKing. When a Linear access control system has an unusual failure, we have the experience to know whether it’s the keypad, the receiver, or the gate itself, because we work on all of it. As an independent Linear service provider, we aren’t beholden to any manufacturer’s script. We tell you what’s actually wrong and fix it right. Victor Salinas has been the name Highland Park homeowners call for decades when a gate won’t behave, and every job we complete carries the 90-Day Done Right Promise in writing. $50 off any repair over $250, a free second opinion on any written estimate, and a 5% senior and veteran discount, always. We will be there when we say.
FAQs
If your Linear system is still under the manufacturer’s warranty, we recommend checking the terms before any independent service work, because some warranties specify authorized service only. Our work as an independent Linear service provider is performed to the same standard, and for older systems already out of warranty, which covers the vast majority of what we see in Highland Park, there is no warranty concern at all. Call (936) 277-6521 and we’ll help you sort out the warranty question first.
Most Linear access control repairs are completed the same day we arrive, because our trucks carry the most common Linear parts and receivers. If a specialized board or keypad must be ordered, it’s typically in hand within one to two business days. Call (936) 277-6521 and we’ll give you a straight answer on turnaround for your specific model.
If the Linear system is solid and the failure is a worn keypad, a relay, or an antenna, repair is almost always the right call. If the system is 15-plus years old and multiple components are failing in sequence, a full retrofit to a modern access control system wired to your existing Linear operator is often the smarter long-term money. We’ll show you the real numbers for both paths and let you decide with the facts in front of you.
Yes. A video intercom or smart access add-on works with most Linear operators already installed in Highland Park, and we do those retrofits regularly. The gate operator provides the motor and the safety circuit; the access control handles entry. We’ll match the new system to your operator and test the full sequence end to end. Call (936) 277-6521 for a free measure and written price.
Every Linear access control repair or retrofit we complete is covered in writing by our 90-Day Done Right Promise. If anything we touched isn’t right within 90 days, we come back and make it right at no charge. No paperwork, no arguing, no exceptions. That’s how we’ve done it for over 42 years.
Written by Victor Salinas, Owner & Lead Gate Technician, Ironworks Gate Co. at Ironworks Gate Co., serving Highland Park and nearby areas.
Before
After
Before
After
Before
After