Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Lakewood
Gate repair in Lakewood usually falls into two buckets: a gate that won’t open, or a gate that won’t close properly. Most jobs we handle in Lakewood are done in a single visit, with the price agreed before we turn a single bolt. If your gate is dragging against a brick column on Swiss Avenue or the opener has gone silent on a 1920s Tudor near White Rock Lake, call us at (936) 277-6521. We’re the dedicated gate specialist for this neighborhood, and we know what these older gates need.
Lakewood is not like other Dallas neighborhoods. The housing stock runs from 1920s bungalows to grand historic mansions, and a lot of those properties still have their original ironwork. That means the repair work here is different. You’re not just swapping a panel on a suburban track home. You’re working with century-old hinges, brick columns that have shifted with the clay, and gates that were hung before modern safety codes existed. We understand that distinction because we’ve been doing this work for over 42 years, led by Victor Salinas, and we’ve seen just about every failure mode a Lakewood gate can throw at us.
Why Ironworks Gate Co. Is Lakewood’s Preferred Gate Repair Company
Homeowners in Lakewood tend to stay put. They’ve lived in the same house for twenty, thirty, sometimes forty years, and they’ve dealt with contractors who overpromised and underdelivered. What they want from a gate company is simple: show up when you say you will, fix it correctly the first time, and stand behind the work. That’s how we’ve built our reputation here.
Our Gate Repair team works on Lakewood properties every week. We know the difference between a gate on Mockingbird Lane and one on a side street off Abrams Road. We know which blocks have original ironwork that needs restoration and which have 1990s steel panels that need replacement. And because we train our technicians on nine automation brands (including BFT, Linear, and Viking), we don’t have to guess when we open the control box. We arrive in a uniform, background-checked, and we carry the parts that Lakewood’s older operators need.
Every job we complete in Lakewood is backed by our 90-Day Done Right Promise. It’s written. If something isn’t right after we’ve done the work, we come back and make it right. No argument, no paperwork, no chasing a warranty department. That promise applies to a $200 hinge repair and a $4,000 automation retrofit alike.
We serve Gate Repair in Lakewood with local dispatch coordinated from our Dallas-Fort Worth office, so a live person answers the phone 24 hours a day, 7 days a week. Not a voicemail. Not an answering service. A person.
Our Gate Repair Services in Lakewood
Hinge & Post Repair
This is the single most common repair we perform in Lakewood. The Dallas Blackland Prairie clay under this neighborhood swells after spring rains and shrinks during summer droughts. That cycle torques gate posts out of plumb, season after season. A gate that was perfectly square in March may be dragging against the brick column by August. We re-plumb posts, replace worn hinges with heavy-gauge hardware, and reset the gate so it swings true. For the older masonry columns on Swiss Avenue and the surrounding historic blocks, we often need to re-set the post footing below the active clay zone before any hinge work can hold. Most hinge and post repairs in Lakewood run $280 to $650 depending on how far the post has moved.
Weld & Rust Repair
The microclimate around White Rock Lake pushes humidity into every exposed piece of iron. Original wrought-iron gates on Lakewood’s 1920s and 1930s homes are especially vulnerable. Surface rust seizes hinges, eats through pickets at ground level, and weakens welds at stress points. We grind back the corrosion, weld in new Lakewood Gate Parts & Welding material where needed, and treat the surface so the repair lasts. For period-accurate gates on Swiss Avenue, we match the existing profile rather than patching with whatever is on the truck. Expect to pay $180 to $450 for typical rust repair and re-welding on a Lakewood gate.
Gate Realignment
When a gate sags or binds, the first instinct is often to adjust the hinges or shim the post. That works temporarily. But in Lakewood, the root cause is usually the post shifting in expansive clay. We realign the gate by correcting the post position first, then re-hanging the gate so the gap between gate and column is even from top to bottom. If the operator has been fighting a binding gate for months, we may recommend replacing the arm or the motor before it burns out entirely. Realignment work in Lakewood typically runs $220 to $400.
Electric Gate Repair
Lakewood has a lot of legacy automatic gate operators. Pre-2000 LiftMaster and Viking units are still out there, still running, and still failing in predictable ways. Corroded low-voltage wiring, dead control boards, and burned-out capacitors are the usual culprits. We carry replacement boards and components for BFT, Linear, Viking, Ghost Controls, and the other major brands, so most Lakewood Gate Motor & Opener repairs are completed same-day. If the operator is beyond repair and needs replacement, we’ll give you a written price before any work starts.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lakewood
We’re trained and equipped on nine leading automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters in Lakewood because the neighborhood has a mix of everything. A 1980s FAAC hydraulic operator on a Swiss Avenue estate and a 2015 Viking swing arm on a Lower Greenville bungalow both need different parts and different expertise. We keep common replacement components stocked for Lakewood jobs, which means we’re not waiting on a distributor in Fort Worth while your gate sits open overnight.
Common Gate Repair Problems We See in Lakewood Homes
- Posts out of plumb from clay movement. The black clay under Lakewood expands and contracts dramatically with moisture. That seasonal movement tilts posts and causes swing gates to bind against brick columns. We correct the post first, then address the gate.
- Rust-seized hinges near White Rock Lake. Persistent humidity from the lake accelerates corrosion on exposed iron hardware. Hinges that haven’t been lubricated in years seize solid. We replace them with sealed-bearing hinges that hold up better in this microclimate.
- Obsolete control boards in legacy operators. Pre-2000 operators lack modern entrapment protection and their control boards fail as low-voltage wiring corrodes. We retrofit safety photocells and replace boards while keeping the original motors where they’re still serviceable.
- Gates hung before UL 325 safety standards. Many Lakewood automatic gates were installed before 2000, when the UL 325 entrapment standard became mandatory. These gates lack reversal sensors and can be genuinely dangerous. We retrofit them to current safety requirements without changing the historic appearance.
Pricing for Gate Repair in Lakewood, TX
Here are the ranges we quote for common Lakewood repairs. Every price is confirmed and agreed in writing before any work begins. That’s not a negotiation tactic. It’s how we work.
- Hinge replacement: $180 to $380 per hinge set
- Hinge and post re-plumb (one post): $280 to $650
- Weld and rust repair: $180 to $450
- Gate realignment: $220 to $400
- Control board replacement: $350 to $850
- Safety sensor retrofit: $250 to $600
- Full operator replacement (motor and arm): starts at $900
Standing offers for Lakewood customers: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount. Call (936) 277-6521 for a free estimate.
We Also Serve Cities Near Lakewood
Our service area includes all of Lakewood, plus neighboring communities across East Dallas. We also serve Highland Park, Dallas, Balch Springs, and Mesquite. If your gate is on the edge of one of those areas or you’re not sure whether we cover your street, call (936) 277-6521 and we’ll let you know. Most addresses within a 20-minute drive of Lakewood are within our normal dispatch range.
Serving Lakewood, TX - Our Local Coverage Area
We’re based in the Lakewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Lakewood
Yes. We install non-contact photocell sensors and edge reversal systems that are barely visible, using wiring paths that follow existing masonry lines rather than surface-mounted conduit. The sensors themselves are small, powder-coated in a finish that blends with period ironwork. Your gate will meet current UL 325 safety requirements without looking like a modern retrofit. Call (936) 277-6521 to schedule an assessment and get a written quote.
A tilted post forces the gate to bind against its hinges every time it cycles. The operator works harder with each open and close, drawing more amperage through the motor. Eventually the motor burns out, and now you have a tilted post and a dead operator. Fixing the post first costs $280 to $650. Replacing the operator you could have saved is another $900 or more. Fix the post. Call us at (936) 277-6521 for an exact assessment.
We start by grinding back all surface rust to bare metal and inspecting the gate for structural corrosion. Any pickets, scrolls, or hinges that are too thin are cut out and replaced with matched wrought-iron material. The entire gate is then treated with a rust-inhibiting primer and topcoat suitable for the humid lake-adjacent microclimate. Most rust repair on a Lakewood gate runs $180 to $450 depending on the extent of the damage. A free estimate takes about 30 minutes.
Yes, in most cases. FAAC’s hydraulic motors from that era are durable and often outlive their control electronics. We replace the old board with a modern compatible unit that provides current safety features and push-button programming while driving the original hydraulic motor and piston. This is a common retrofit we perform in Lakewood. Replacement boards with labor typically run $350 to $850. Call (936) 277-6521 to confirm your model is compatible.
Properties within the Swiss Avenue Historic District fall under Dallas’s preservation review process for exterior alterations, including gates. A repair that maintains the existing gate in place generally does not require review, but replacement or significant modification requires approval from the City of Dallas Historic Preservation staff. We can advise you on which category your project falls into and recommend fabricators who replicate period wrought-iron profiles. Call (936) 277-6521 and we’ll walk you through what applies to your property.
One more thing about Lakewood gates that most people don’t realize until they’ve lived here through a full seasonal cycle. The same clay that cracks your foundation is working on your gate posts. Spring rain swells the ground, posts lean, the gate starts dragging. Summer drought shrinks the clay, posts may lean the other way, and the gate gap widens. Homeowners chase the problem with hinge adjustments and latch extenders when the real fix is below the soil line. We re-plumb posts below the active clay zone precisely because we’ve watched this cycle repeat for decades in this neighborhood. A gate that gets this correction once typically stays square for years, not months.
Our crew recently re-plumbed a leaning hinge post on a 1920s Tudor in Lower Greenville after its original wrought-iron swing gate began dragging against the brick column. We removed the gate, bored new post footings below the active clay zone, reset the post plumb and square, then installed fresh FAAC hinges and a Keypad entry system wired through the existing masonry to avoid disturbing the period facade. That’s the difference between a patch and a repair. The gate closes smooth now, and the column is carrying the load the way it was designed to in 1926.
Call Ironworks Gate Co. for Gate Repair in Lakewood
If your gate is sagging, stuck, seized, or silent, call (936) 277-6521. A live person answers every time, day or night. We’ll schedule a visit, diagnose the problem, and give you a written price before any work begins. No surprises on the bill, no pressure to replace what can be repaired, and a 90-Day Done Right Promise in writing on every job. That’s how Victor Salinas has run Ironworks Gate Co. for over 42 years, and that’s the standard your Lakewood gate deserves.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Lakewood with dedicated gate repair since 1984.