Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Farmers Branch
If you’re in Farmers Branch and your swing gate is dragging, your slide gate won’t open, or your keypad has gone dead, we can usually get a technician to your driveway the same day you call. Most gate repairs in Farmers Branch run between $180 and $650, and we settle the price before any work starts, so the bill never surprises you. Call (936) 277-6521 and a live person answers. No voicemail, no answering service, no waiting until Monday. We’ve worked on gates throughout Farmers Branch for years, from the older ranch-style homes near Rawhide Creek to the gated properties off Valley View Lane, and we know exactly how this soil and this weather treat a gate.
Why Ironworks Gate Co. Is Farmers Branch’s Preferred Gate Repair Company
We’re not a handyman service that happens to look at gates. Ironworks Gate Co. works exclusively on driveway and estate gates: the hinges, the posts, the motor, the keypad, the welds, the whole system. That focus matters when a gate has been sagging for three seasons and the homeowner just wants it fixed once. Farmers Branch homeowners call us because the last guy didn’t diagnose the soil problem under the post, he just tightened the hinge and left. Our crews live with this work daily. We know that a gate on Hillcrest Road behaves differently in August than one on Golfing Green Drive after a wet March.
Victor Salinas, who leads Ironworks Gate Co., built the company on a simple standard: if it isn’t right, we come back and make it right. That’s not a slogan. It’s the 90-Day Done Right Promise, in writing, on every single job. Farmers Branch customers also get background-checked, uniformed technicians who treat your driveway like their own mother’s. And when you call, a person picks up. Twenty-four hours a day, seven days a week. That’s a lot of phone ringing, but it’s how we’ve worked for over 42 years. We intend to be answering that phone for another forty.
Our Gate Repair Services in Farmers Branch
These are the jobs we handle most often in Farmers Branch. If yours doesn’t fit neatly into a box, call anyway. We’ll tell you honestly whether we can help.
Electric Gate Repair
Electric gates in Farmers Branch sit in an environment that punishes them: clay soil shifts, rain follows heat, and low-voltage wiring runs underground where roots and moisture work against it. When an operator hums but won’t move, or trips its internal breaker repeatedly, the fix usually lives between the motor and the control board. We diagnose on site, replace what’s failed, and test the full travel cycle before we leave. This is the work our Gate Repair team handles most weeks across Dallas County.
Automatic Gate Repair
An automatic gate is a machine with moving parts, safety circuits, and a brain. In Farmers Branch, the most common automatic gate failures we see are limit switches misaligned by post lean, photocells knocked out of alignment by lawn equipment, and control boards fried by power surges during spring thunderstorms. We carry boards, arms, receivers, and safety cells on the truck for LiftMaster, FAAC, and Ghost Controls systems, among others. Most automatic gate repairs are completed the same day in Farmers Branch.
Hinge & Post Repair
This is the repair we do more than any other in Farmers Branch. The expansive clay under this city swells when wet and contracts when dry, season after season. That movement pushes hinge posts out of plumb, which loads the hinges until they tear or the gate starts dragging on the latch side. We don’t just patch it. We dig the footing down to 36 inches where the soil asks for it, set the post in high-strength concrete, and rehang the gate so it swings true. A band-aid fix here guarantees a second call next spring.
Gate Realignment
A sagging gate is almost never just a hinge problem in this part of Farmers Branch. It’s almost always the post underneath. Our crew realigned a sagging wrought-iron swing gate on Valley View Lane where the hinge post had pulled 2 inches out of plumb after a wet spring. We dug the post footing to 36 inches, reset it in high-strength concrete, corrected the sag, and upgraded the Ghost Controls operator with a new safety photocell pair, UL 325 entrapment protection verified before we left. That’s the difference between a gate that works for a month and one that works for decades. Farmers Branch clay demands a real fix, and that’s the only kind we sell.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Farmers Branch
We’re trained and equipped on nine gate-automation brands, which means the fix is right on the first visit no matter what’s bolted to your driveway. Most Farmers Branch homes we visit run LiftMaster, FAAC, or Elite openers, but we also see plenty of Mighty Mule and Ghost Controls on the older estates near the creek. Because we stock common boards, arms, and safety cells locally, turnaround is fast. No waiting a week for a part to ship from somewhere else. If it’s on a gate and it moves, we’ve probably worked on it this month.
Common Gate Repair Problems We See in Farmers Branch Homes
- Clay-soil heave tilts hinge posts forward. The latch side starts dragging, and the force of that drag pushes the operator’s limit switch out of adjustment. Symptom: the gate closes halfway then reverses, or grinds against the stop.
- Inlet-box flooding from creek overflow corrodes underground loop detector splices. Automatic slide gates near Rawhide Creek fail to open for exiting cars after heavy rain because the detector loop can’t sense the vehicle. The splice underground rots, and the gate just sits there.
- Rack and pinion slide gates bind when the concrete track bed cracks. Soil movement under the track bed shifts it a fraction of an inch, which is enough to bind the rack and strip the drive gear on the operator. We see this on slide gates all over Farmers Branch, especially on properties that slope toward the floodplain.
- Keypad entry stops working after heavy rain near the creek. Water gets into the keypad housing or the low-voltage splice at the base of the post. It corrodes the contact points, and the system stops reading codes. This is a quick fix when caught early, and a larger one if it’s left to stew for months.
Pricing for Gate Repair in Farmers Branch, TX
A typical hinge or post repair in Farmers Branch runs $250 to $550 depending on the post size and footing work. Gate realignment usually falls between $180 and $400. Automatic gate repair, including control board replacement or limit switch work, runs $200 to $650, and full operator replacement starts around $800 and climbs from there based on the gate’s weight and length. Slide gate track repair on cracked concrete usually lands between $400 and $900. These are honest ranges for the Farmers Branch market, not bait. We quote the exact number before any work begins, and the number on the quote is the number on the invoice. You also get the 90-Day Done Right Promise on every job. Call (936) 277-6521 for a free estimate.
We Also Serve Cities Near Farmers Branch
Our crews roll out from our Dallas-Fort Worth office to serve the surrounding area, including Highland Park, Dallas, Balch Springs, and Mesquite. If you’re just outside Farmers Branch, we’re still close. And if you’re in the heart of it, our Gate Repair in Farmers Branch coverage includes every neighborhood, every street, every driveway.
Serving Farmers Branch, TX - Our Local Coverage Area
We’re based in the Farmers Branch area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Farmers Branch
The expansive clay soil under Farmers Branch swells when it absorbs spring rain, and that swelling pushes hinge posts out of plumb. When the soil dries and contracts in summer, the post stays where the clay left it: leaning. Every wet spring repeats the cycle, and the sag returns. The only durable fix is resetting the post in a deeper footing with high-strength concrete, usually at 30 to 36 inches. Tightening hinges will not stop the movement. Call (936) 277-6521 and we’ll dig it out, set it level, and back it in writing.
Yes. Every automatic gate operator manufactured after 2016 is required to have a UL 325-compliant entrapment protection device, which in most cases means a photocell pair or a contact edge. In Farmers Branch, where tree debris, lawn equipment, and shifting posts are common, photocells get knocked out of alignment easily. If you see a gate reverse for no reason, or not reverse when it should, the photocell is the first thing we check. It’s also a serious safety issue: a gate without working entrapment protection can injure a child or pet. If yours isn’t working, call us. We’ll test it, align it, or replace it on the first visit.
The track bed, almost always. Farmers Branch sits on an older creek-bed floodplain, and the concrete under slide gates cracks as the clay beneath it moves. Once the track is even slightly out of line, the gate binds, and the drive gear on the operator strips itself trying to force movement. By the time you hear grinding, the gear is already wearing. Catching track movement early saves the operator. We inspect the full travel path, from the V-track to the end stops, on every slide gate call in Farmers Branch.
In most cases, yes. We dig out the existing post footing, which is usually 24 to 30 inches deep, and we go down to 36 inches where the clay asks for it. The new footing stays within the post’s footprint, so we rarely need to cut into the driveway itself. If the driveway slab has already cracked around the post from years of lean, we’ll talk through the options honestly before touching it. The post is the foundation of the whole gate system, and in Farmers Branch soil, shallow is why it failed the first time. Call (936) 277-6521 for a free on-site look.
Water is getting into the keypad housing or into the low-voltage splice at the base of the post. Properties near Rawhide Creek and the lower areas of Farmers Branch see exactly this after a storm. The fix is usually a reseal of the keypad box and waterproofing the splice with a gel-filled connector. We’ve also seen contractors bury low-voltage wire without conduit, which fails quickly in wet soil. If your keypad is dead after rain, call (936) 277-6521. We’ll find the wet splice, fix it properly, and test it before we leave.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Farmers Branch with dedicated gate repair, installation, and automation service. Done right, and backed in writing.