Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Dallas
A sagging swing gate on a Preston Hollow driveway or a slide gate that quit responding in Lake Highlands is more than an annoyance. It’s a security gap. Gate repair in Dallas typically runs $165-$485 depending on the failure, and most jobs are completed the same day we arrive. Call (936) 277-6521 and a live person answers, 24 hours a day.
We work in every Dallas neighborhood, from Oak Cliff’s older pedestrian gates to North Dallas estate entries. The first thing we check is almost never the gate itself. It’s what the gate is bolted to. In Dallas, that distinction matters more than homeowners expect.
Why Ironworks Gate Co. Is Dallas’s Preferred Gate Repair Company
Homeowners across Dallas have called Ironworks Gate Co. for over 42 years, and the reason is unglamorous but true: we fix the cause, not the symptom. A gate that binds in July and works again in October tells us more about the soil than the operator. Our technicians know Dallas’s Blackland Prairie clay the way a mechanic knows an engine that’s been overheated twice. We expect the post to move. We plan for it.
Victor Salinas leads a team that is trained on nine gate automation brands, so when we pull up to a 1990s FAAC unit in Lakewood or a newer Viking operator in Addison, the diagnosis doesn’t start with a guess. It starts with familiarity. Most repairs are completed in a single visit, with the price agreed before a single bolt is turned. Every job comes with our written 90-Day Done Right Promise. That guarantee is the same for a hinge repair in Mesquite as it is for a full operator replacement in Preston Hollow.
We serve Dallas with crews dispatched from our Dallas-Fort Worth office. Response time to most Dallas neighborhoods is the same day for repair calls, and our phone is answered by a person, not a queue, at 3 a.m. or 3 p.m.
Our Gate Repair Services in Dallas
Electric Gate Repair
Older Dallas homes, particularly the 1980s and 1990s ranches in North Dallas, often have operators that predate modern safety requirements. A dead control board on a 1998 LiftMaster doesn’t need a lecture, it needs a solution. We diagnose the board, the motor, the limit switches, and the wiring path. If the unit is worth saving, we fix it. If the parts are obsolete and repair money would be wasted, we tell you that directly and price a replacement that won’t fight the clay.
Automatic Gate Repair
Automatic gates in Dallas fail in patterns. The February 2021 freeze cracked actuator lines and killed backup batteries across thousands of systems. The summer heat bakes insulation and warps plastic housings on west-facing gates. When an automatic gate won’t open or close on command, we trace the failure: power, board, motor, obstruction sensor, or the post underneath it all. The fix only holds if the diagnosis is right the first time.
Hinge & Post Repair
This is the repair most gate companies in Dallas get wrong. A leaning post in East Dallas or a racked hinge in Oak Cliff is nearly always driven by the clay below, not the metal above. We reset posts in deeper concrete footings with a gravel weep layer so water doesn’t build pressure against the base. That’s the difference between a gate that stays plumb through a Dallas drought-flood cycle and a gate that leans again next August.
Gate Realignment
When a swing gate drags on the driveway or a slide gate scrapes its rail, the common fix is to adjust the hinges. The correct fix is to find out why the geometry shifted. In Dallas, the answer is frequently the Blackland Prairie clay shrinking during the summer and swelling after fall rains. We measure the post angle, correct the footing if needed, and then realign the gate. A gate tuned in November without a stable post will be dragging by July.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Dallas
Ironworks Gate Co. is certified on nine automation brands, and Dallas driveways are full of them. We service BFT slide operators in Preston Hollow, Linear swing arms in Lake Highlands, Viking units in far north Dallas, and Ghost Controls systems on newer installations. Because we’re brand-trained, we arrive knowing the board layout and the failure points. That means fewer return trips and a correct fix on the first visit. We keep common parts stocked for fast turnaround across the Dallas area.
Common Gate Repair Problems We See in Dallas Homes
- Post heave from Blackland clay. After a Dallas rain, the clay swells and pushes posts upward and sideways. A gate that cleared its post last week binds this week. The operator trips its obstruction sensor because the geometry moved.
- UV-baked wiring and boards. Dallas summers with weeks of 100°F degrade wire insulation and plastic housings faster than almost any U.S. market. A west-facing gate that gets the full afternoon sun will show cracked insulation and warped boards years before a shaded gate does.
- Post-Uri freeze damage. The February 2021 storm froze actuator fluid lines, killed batteries, and destroyed control boards in one week. Many Dallas homeowners patched their systems afterward. We still find freeze-cracked seals and weakened batteries that were never actually replaced.
- Legacy safety systems that no longer meet code. Gates hung in Dallas in the 1980s and 1990s often lack modern photocells and obstruction reversal. A working gate isn’t necessarily a safe gate. We can retrofit safety equipment onto older systems without replacing the entire operator.
Pricing for Gate Repair in Dallas, TX
Here’s what Dallas homeowners can expect to pay in 2025. A hinge replacement on a pedestrian gate runs $165-$280. Post re-anchoring with a new concrete footing runs $300-$650 depending on post size and whether the gate must be lifted. Control board replacement on an older LiftMaster or FAAC unit runs $220-$480. A full operator replacement, including labor and programming, runs $850-$2,400 depending on brand and gate weight. Slide gate actuator repair after freeze damage runs $340-$700.
The price is quoted and agreed before we start. Not after. Free estimates are standard, and we offer a free second opinion on any written estimate you’ve received from another company. Call (936) 277-6521 for an exact quote on your gate.
We Also Serve Cities Near Dallas
Our Gate Repair crews cover all of Dallas plus the surrounding metro. We work in Irving and Balch Springs, handle routine repairs in Mesquite, and service automatic operators in Addison. If you’re five minutes from the county line or deep in the Park Cities, the same technicians, the same written guarantee, and the same live-answer phone line apply.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Dallas
That’s the Blackland Prairie clay contracting in the August heat. The ground dries, the post tilts a degree or two, and the limit switches fall out of calibration. The gate refuses to close all the way. Fall rains swell the soil, the post tilts back, and the gate cycles again. Until the post is stabilized in a deeper footing, that gate will fail on the same seasonal schedule. Call (936) 277-6521 and we’ll set the post properly.
Yes. A gate from the 1990s can accept modern photocells and obstruction-reversal hardware without replacing the operator. We do this regularly on homes in North Dallas and the Park Cities where the original operator still works but the safety equipment is outdated. The retrofit is faster and cheaper than a full replacement.
In Dallas, it’s usually the hinge post. The clay under the post has moved, the post has leaned, and the gate panel is now hanging off-plumb. A bent panel is possible after an impact, but most sagging gates we see in this market trace back to post movement. We measure the post angle before touching the hinges. Call (936) 277-6521 for a free assessment.
The hurricane likely damaged the actuator’s internal fluid or gears when ice expanded inside the housing. We saw this failure repeatedly after the February 2021 storm in Dallas. The motor spins, but the drive mechanism can’t transfer power. In most cases, the actuator needs replacement or rebuild, not a new board. We’ll diagnose it on site and give you a fixed price before any work starts.
Yes, and we do it often. The post is lifted, the old footing is broken out, a new deeper footing is poured with a gravel weep layer at the base, and the post is set plumb. The existing gate panel stays in place. This is the standard fix for East Dallas gates on leaning posts, and it holds through the clay’s wet-dry cycle. Call (936) 277-6521 for a specific quote.
Call Ironworks Gate Co. for Gate Repair in Dallas
If your Dallas gate is sagging, stuck, or refusing to close, call (936) 277-6521. A live person answers. We’ll schedule a repair, give you a written upfront price, and stand behind the work with a written 90-Day Done Right Promise. That’s the whole deal, and it’s the same deal we’ve given Dallas homeowners for over four decades.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Dallas and the surrounding metro.