Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across North Dallas
A gate motor replacement or repair in North Dallas typically runs $450 to $1,600 depending on the operator type, and most motor repairs are completed in one visit. We’re the gate company homeowners in Preston Hollow, Midway Hollow, and along Hillcrest Road call when the opener quits and the gate won’t budge. Ironworks Gate Co. has been doing this work for over 42 years, and Gate Motor & Opener service is all we do. Call (936) 277-6521 and a live person answers, day or night.
Why Ironworks Gate Co. Is North Dallas’s Preferred Gate Motor & Opener Company
North Dallas homeowners tell us the same thing again and again: they’ve had a handyman look at the gate, or a generalist garage door company, and the fix didn’t last. We only work on driveway and estate gates. It’s a narrow trade, and that’s why we know it cold. Our background-checked, uniformed technicians carry North Dallas Gate Parts & Welding supplies for nine major brands on the truck, so when we arrive at your North Dallas home, we’re ready to work, not run to the supply house.
Our 90-Day Done Right Promise applies to every job, written on every invoice. If the gate isn’t right, we come back and make it right. No paperwork, no arguing. That’s the Keystone Standard. For North Dallas homeowners who have lived in the same house for twenty or thirty years and plan to stay another twenty, that guarantee matters more than a cheap bid.
We dispatch North Dallas jobs from our Dallas-Fort Worth office, which keeps response times tight. If your gate is stuck open or stuck closed, we’ll get a technician to you fast. Most motor repairs in this part of town are handled the same day you call. Victor Salinas, who leads our crews, insists on a square deal: the price is agreed before a single bolt is turned, and the bill matches the quote.
Our Gate Motor & Opener Services in North Dallas
Motor Installation
Proper Gate Installation in North Dallas means more than bolting an operator to a post. We check the gate’s weight, the hinge post footing, the swing arc or slide track alignment, and the condition of the underground conduit. For 1970s and 1980s ranch homes off Royal Lane and Forest Lane, that conduit is often original and brittle. We replace it when needed rather than fishing new wire through cracked PVC. A new swing gate operator installation in North Dallas typically runs $1,100 to $1,600 installed. Slide gate operators run higher, $1,400 to $2,100, because the rack and track work is more involved. We quote the full job up front; there’s no surprise on the back end.
Motor Repair
Most North Dallas Gate Repair calls are completed in a single visit. We diagnose the control board, limit switches, capacitor, and gearbox before recommending anything. If a capacitor failed on a Viking operator on a home near Preston and Northwest Highway, we replace it and test the full cycle, including safety reversal. Typical motor repair costs in North Dallas run $180 to $450 for board and component work. A full gearbox rebuild on a slide operator can run $400 to $700. We tell you the number before we turn a wrench.
Linear Motor
Linear and BFT operators are common on North Dallas estates, and we service both. Linear arm operators on older iron swing gates develop drift over time as the motor’s internal limit switches wear. The fix is often a limit switch adjustment or replacement, not a whole new operator. We test the auto-reverse under UL 325 standards on every Linear motor job, because an opener that doesn’t reverse on contact is dangerous. Linear motor service in North Dallas typically runs $250 to $600, depending on whether it’s a board, arm, or motor swap.
Slide Motor
Slide gates on North Dallas properties with longer driveways put constant strain on the rack and pinion. Dallas clay soil moves. It expands when wet and contracts when dry, which can shift the track a half inch over a decade. That’s enough to strip gear teeth. When we repair a slide motor here, we check the rack alignment and track level at the same time. Motor only, no track correction: $350 to $800. If the rack needs re-seating or replacement, the job runs $500 to $1,200. We’ll show you what’s actually wrong before we fix it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Dallas
Our technicians are trained and equipped on nine gate automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For North Dallas homeowners, that means whatever is bolted to your gate post, we’ve seen it before. We carry common boards, arms, capacitors, and safety photocells for BFT, Linear, and Ghost Controls operators on the truck, which keeps repairs to one visit. No waiting on parts from a distributor.
Common Gate Motor & Opener Problems We See in North Dallas Homes
- Failed rack and pinion on slide gates. Years of Dallas clay soil shifting the track strip the gear teeth. The motor runs but the gate doesn’t move. We see this on slide gates along Inwood Road and Midway Road where the track bed was poured decades ago without a proper gravel base.
- Dead swing gate motors after spring storms. North Dallas gets real thunderstorms, and power surges through older panels kill control boards instantly. Homes without a battery backup or surge protection lose the motor entirely. A surge-protected battery backup installs for $250 to $450 and saves the board next storm.
- Loop detector false triggers near Mockingbird Lane. Underground utility currents along that corridor interfere with older loop detector boards. The gate opens or stays open for no reason. We replace the loop detector with a newer shielded unit, typically $250 to $400.
- Sagging hinge posts on original iron gates. The 1970s to 1990s ranch homes across North Dallas often have original iron driveway gates hung on posts set without deep concrete footings. The post leans, the gate drags, and the motor burns out trying to push it. We reset the post before replacing the motor, or the new motor dies early too.
Last spring we replaced a LiftMaster LA400 swing gate operator on a home off Preston Road where the original gate had sagged nearly two inches at the hinge post. Instead of just swapping the motor, our crew reset the post footing, corrected the sag, and installed new safety photocells, then tested the auto-reverse under UL 325 so the gate stops and reverses on contact. That’s the difference between a motor swap and a repair that lasts.
Pricing for Gate Motor & Opener in North Dallas, TX
Here’s what we actually charge in North Dallas, no vague language. Swing gate motor repair runs $180 to $450 for board and component work. Slide gate motor repair runs $350 to $800. A new swing gate operator installed runs $1,100 to $1,600. A new slide gate operator installed runs $1,400 to $2,100. Battery backup with surge protection adds $250 to $450. Safety photocell replacement or addition runs $150 to $300 per pair. Every price is quoted and agreed before any work starts. We offer a free estimate, a free second opinion on any written estimate from another company, and $50 off any repair over $250. Senior and veteran discount of 5% applies always.
We Also Serve Cities Near North Dallas
Our crews regularly work in Gate Motor & Opener in North Dallas and the surrounding communities: Highland Park, Dallas proper, Balch Springs, and Mesquite. If you’re nearby, give us a call at (936) 277-6521 and we’ll schedule a visit.
Serving North Dallas, TX - Our Local Coverage Area
We’re based in the North Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in North Dallas
A power surge during a North Dallas thunderstorm likely fried the control board or a capacitor inside the operator. The power comes back on, but the board is dead. We see this most often on gates without surge protection or battery backup. The fix is usually $180 to $450 for a new board, plus $250 to $450 if you want surge protection installed so it doesn’t happen again next storm. Call (936) 277-6521 and we’ll diagnose it on site.
Yes, in most North Dallas homes we can retrofit a belt-drive swing operator onto your existing iron gate as long as the hinge posts are solid and the gate isn’t sagging more than a half inch. We check post footing first. If the post has shifted, we reset it before hanging the new motor. A belt-drive swing opener installed typically runs $1,200 to $1,700 in North Dallas. The gate stays; the noisy chain-drive motor goes.
It usually means the safety photocells are misaligned, dirty, or failing, or the gate is binding on a shifted post or track. North Dallas clay soil shifts posts over time, which changes the gate’s path mid-cycle. The motor senses resistance and reverses as a safety response. We check the photocells first, then the post alignment, then the track level. Most of these calls are fixed in one visit for $150 to $400. Call (936) 277-6521 and we’ll find the actual cause.
A standard slide gate operator replacement on a prepared concrete pad in North Dallas takes four to six hours, scheduled in advance. If the rack or track needs correction, plan for a full day. We don’t rush installations and we don’t promise same-day on new work; the job is measured, the parts are confirmed, and the pad is inspected before we schedule. You’ll get a written price and a scheduled date before anything is ordered.
If the motor is under ten years old and the failure is a board, capacitor, limit switch, or gear, repair is usually the right call and costs $180 to $700 in North Dallas. If the motor is fifteen or twenty years old, or the gearbox is shot, replacement often makes more sense at $1,100 to $2,100 installed. We show you the failed part and explain both options with a written price for each. You decide. We never push a new motor when a $200 board fixes it.
If your gate motor is dead, stuck, or acting up, call Ironworks Gate Co. at (936) 277-6521. We’ll give you a straight answer and a written price before any work begins. Free estimates, $50 off any repair over $250, and a 90-Day Done Right Promise on every job. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving North Dallas and the surrounding communities.